@JKK74, the information you have provided is pure gold. Thanks a lot!
Quote:
Originally Posted by JKK74
But without heating option this line above is non-wired. This is propably main reason for problems for all who had tried to get this retrofit working... I think so. For me it took couple of hours to find this damned missing line / X424*1B -connector before get this working. So you have to wire that missing line behind fuse box from F57 to "X434*1B" (pin1) and then your steering wheel electronic module (TIS: A69) will be powered.
|
One question. The wire that I need to take from the Z44 fusebox, fuse #57 that's in the glovebox and plug into PIN1 of X434*1B....
where at fuse #57 do I need to tap into, as I guess the fuse has 2 pins?
Do you get steering wheel enabled messages on the instrument cluster, and do you have auto turn on below x temperature in iDrive with 248 coded into BDC, HU, KOMBI? Will buy an E-SYS ethernet cable (only have ISTA USB-to-COM one), and with the help of
e-sys explanatory video and
short g30 esys video think I have the coding part sorted out as well.