[Sasquartch]

I've had a further look and strangely the coloured squares that light up on the reverse cam display to indicate a hazard seem to work
So it's just the guidelines

On someone's suggestion I used ISTA/D to check / initialise ethernet but this reported no problem.

I can still see the TRVCS module in ISTA/D but not the ICAM4. eSys sees the ICAM4, and no TRVCS. ISTA/D says the module is not coded or something similar.

I connected up esys again and tried to code ICAM4 and it failed (sure it was ok yesterday but might be wrong)

Under the SVT tree the CAFD is CAFD_FFFFFFFF_255_255_255 which doesn't look right, when I code I get the following error :

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
ExecutionID=2018/09/01-09:18:54.097
TAL execution finished
TAL-Execution finished with status: "Finished". [C207]
TAL execution finished. Duration: "2s". [C206]
MSM update: Read current SVT. [C194]
MSM update started. [C215]
MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromC smClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_NBT2_63_ETHERNET>
MSM update finished with error. [C217][] There was an error, please check the log files.

Error in MSM Update:
[] - [Exception - MSM - 10] job failed with negative response error:
code: KeyExchange F30 failed!
description: no detailed description available; LinkName: MSM_ETHERNET
severity: ERROR
Error during MSM update. [C214]
job failed with negative response error:
code: KeyExchange F30 failed!
description: no detailed description available; LinkName: MSM_ETHERNET
severity: ERROR
[433]

VCM Update: Write FA to VCM. [C188]
VCM Update: Write FP to VCM. [C190]
VCM Update: Read current SVT. [C191]
VCM Update: Check current SVT with TAL. [C192]
VCM Update: Write target SVT. [C193]
VCM Update: Write FA to backup. [C189]
VCM Update: finished. [C195]
Abarbeitung beendet


Also :

Transaktions-Report: Aktion: Codieren

File for "cafd_ffffffff-255_255_255" not found! [C012]


So it seems it's a coding issue, I'm struggling to understand what this would mean.

Any ideas welcome !

@shawnsheridan Could this be a psdzdata issue ? I have the latest from you I think