[QUOTE=cclcal;28202437]
Quote:
Originally Posted by Joe-BMW33
Nice, looking forward to pics. So the OEM diffuser just pulls off or are there screws holding it down?
Edit: Never mind, got it:
hey guys, so ive installed the new diffuser from ebay. fits great, color is great, wife likes the look and color better than OEM.
1. I installed left side 1st, right gap is a little wider than left, i tried moving shifting diffuser and it helped a little, moving actual bumper helps too.
2. When removing the OEM diffuser, there are total of 10 screws, use a 8mm socket. After removing all screws, just gently pull on diffuser, pushing on bumper and it comes right out. There are four clips on bottom that comes out easily by pushing up. New diffuser, there are 9 screw holes, but only used 7. The clips line up with bumper. However, there are two screw holes that cannot be lined up to heatshield.
any questions?
|
Looking good! The gaps aren't really that obvious.