Quote:
Originally Posted by ccfj1
That is the correct digital tv module.
I suspect that you have not repined the FBAS pins to the new cic configuration and that you have not selected the correct wert for the tv.
you will need to do 2 things.
1: default code the cic to the car (so that it knows it has a TV), this will also set the correct wert (FBAS input pins) on the cic.
2: you will need to repin the small black 12 pin connector in the base of the quadlock to the correct pins for cic.
you do not need to alter the blue plug at the tv end, just the plug in the quadlock. its 3x pins
|
Thanks a lot for the good news!
Coding is done and fine, already have the stations sound.
So need to follow your below guide I suppose:
cic single plug:
18: video +
27: shield
28: video
Would you know by any chance which current pins on the cic connector need to be moved to above positions?
Also I suspect ccc has 5 wires ? so is it ok to leave the other 2 on the connector or need to be disconnected to avoid any issues?