Quote:
Originally Posted by Shatter
6WB retrofit can be carried out with only E-Sys, Adding 6WB to your VO and coding KOMBI/HU. Launcher is only for adding back the mappings to psdzdata, since BMW only provides trimmed ones nowadays and these are required only if you perform FDL coding (individual lines inside module).
Fastest and safest way is to use remote services if you are new to the tools, good luck on your endeavor nonetheless. 6WB is awesome.  |
Bringing this thread back from the dead!!
Shatter I am actually doing a 6WA to 6WB retrofit and would love to know the steps/guides you used. I have a 2018 G30 530e with Nav/NBT/ID6 and HUD. I figure if you have a G30 with Nav I can follow your process and it should work for me. I literally just ordered a virginized 6WB last week and am ready to go.
I plan on using E-Sys 3.31 with the latest PS lite data, it's good to hear that I may be able to launch E-sys directly without using a launcher if possible to change the VO and do the various codings.
The closest to an actual walkthrough is on the X3 forums (DIY: G01 Full Dynamic Digital Cluster Retrofit (Option 6WB)) and most are saying that these instructions should work for a G30, but I am not sure.
If you can PM me directly or post here that would be great!
