|
I changed at my BMW iX3 following code: (Used Bimmer Utility)
Turn indicator 5x blink @ iDrive menu:
H_MGU Turn signal 5x @ iDrive menu -> Disabled set to
H_MGU Turn signal 5x @ iDrive menu -> Enabled
Lane Change Assist: (Expert Mode in BU)
Module to be selected from dropdown menu in expert mode of BU 7038
BDC_Body3 CAFD 7038 3420 PfSarahMaster SpurwechelAssistent -> nicht_activ set to
BDC_Body3 CAFD 7038 3420 PfSarahMaster SpurwechelAssistent -> activ
HU_MGU SpurWechelAssistent -> nicht_activ set to
HU_MGU SpurWechelAssistent 300A SARAH -> activ (Gen_1)
SAS3 C_SWA_Vorhanden -> Nr000-nicht _vorhanden set to
SAS3 C_SWA_Vorhanden -> Nr001-vorhanden
No country codes changed (Living in the Netherlands).
By using above code changes SWA Lane chage assist is working.
- When Turn signal is hold down for a few seconds the car start with moving over and turn indicator blinks 6x times (setting 5 times in the iDrive was more to go from 3 to 5 blinks w/o LCA activeted).
- When a car is already passing you LCA will not work and the car passing you will turn into yellow. When no car is at the lane the BMW will start changing the lane.
Next try will be traffic light assistance, when I cross the border towards Germany it will work w/o issue. Stop at red and automatic continue at green.
|