Quote:
Originally Posted by matty81
How do you enter those hex numbers into BimmerCode? When you go to edit the colour and enter custom value it only lets you add 2 numbers?
|
Quote:
Originally Posted by ejlover06
You enter 2 digit code for each color (Red, Green and Blue).
For an example color code: BF00FF you must enter the alphanumeric sequence for each LED separately such as:
for Red: BF
for Green: 00
for Blue: FF
|
Exactly as ejlover06 said. Furthermore, for G30 the color groups are seperated into 4 zones which are :
1.) GROUP_
x_FARBE_ENSEMBLE_
y_R(G)(B)
2.) AMBIENTE_FARBE_ENSEMBLE_
x_LAYER_
y_R(G)(B)
3.) AMBIENTE_FARBE_ENSEMBLE_
x_LAYER_
y_R(G)(B)
4.) AMBIENTE_FARBE_ENSEMBLE_
x_LAYER_
y_R(G)(B)
x in blue are the 11 selectable presets in our cars.
y in red are the specific part of the light.
1 = Upper Contour Line
2 = Lower Contour Line
3 = Foot Rest & Side Pockets
4 = Dome light (Lighting to a transmission console)
If you use Bimmercode with expert mode you will see them already sort down in the order. We need change only these 4 layers because our g30s have only 4 parts of the ambiente lights. No need to change for layer 5 and more. It means that you have to change 3x4=12 parameters (2 digits each) for one preset.
hope my answer will help.