Quote:
Originally Posted by Junebug85
I fitted some 50w CREE LED Pure White bulbs earlier and even coded out the bulb error warning message using BimmerCode.
I had to buy the UniCarScan OBD 2 device as my Vgate 3 wifi wss limited to what it can code on the G platform cars.
I looked through the modules but as mentioned before, nothing was clear cut. I then went into expert mode and In the Body Domain Controller I found 3061. I remember this from when I coded the bulbs in my F30 335d.
Here's what I made Not Active:
3061 RFS_L_KALTUEBERWACHUNG = nicht aktiv
3061 RFS_L_WARMUEBERWACHUNG = nicht aktiv
3061 RFS_L_IS_LED = aktiv
3061 RFS_L_KALTUEBERWACHUNG = nicht aktiv
3061 RFS_L_WARMUEBERWACHUNG = nicht aktiv
3061 RFS_L_IS_LED aktiv
Coding successful and error gone!
|
Thanks for the coding!
This is what worked for me.
3061 RFS_L_WARMUEBERWACHUNG = nicht aktiv
3061 RFS_L_IS_LED = aktiv
3061 RFS_R_WARMUEBERWACHUNG = nicht aktiv
3061 RFS_R_IS_LED = aktiv
I was not able to change these two lines of coding using Bimmercode. After selecting nicht aktiv it would automatically reset to 'default'
3061 RFS_L_KALTUEBERWACHUNG = nicht aktiv
3061 RFS_R_KALTUEBERWACHUNG = nicht aktiv