|
Hi, I had a problem replacing the valve stems, starting with cylinder 5, I replaced the valve stems on the exhaust side, no problem, continuing on the intake side, I had a problem, I couldn't remove the spring vtt compression tools, so I turned the engine around so I could remove the tool and change the valve stems. Continuing on cylinder 6, I turn the engine to put cylinder 6 in the high position and I realize that it is blocking at cylinder 8, the valve must touch the piston, I have probably shifted the valves on the intake side , how to reset the valves on the intake side ?
My car 2013 bmw f10 M5.
Thank you for your help.
|