Quote:
Originally Posted by CHicksM575
No, everything you just said has no impact on these. I had these before I powdercoated them. Look at the pic below. You would need over 15mm of build-up to impact the "teeth" and the "float"
|
Yea not sure man, mine work fine with 759s, and they don't with 668s. Not sure why this is happening to some and not others.
Quote:
Originally Posted by gladesteen
My 2020 M550 build sheet shows the car was ordered with 668M's and additionally the $155 Floating Center Caps. They dont spin anymore, or maybe were replaced ? I dont know. I'm the second owner. However my car is going in for its annual oil change this month and I will ask Service if this is something covered since it was on the build sheet.
|
Pop one out and see if they are floating caps, if they are check to see if the counter weight will spin while holding it.