Quote:
Originally Posted by eyacelg
I found this well-explained process done by #netnick https://www.drive2.ru/l/489376958556144044/ it's in Russian but with googletranslation, we can understand.
however, I have some questions :
1- what is the utility of OABR connector? coding? we can't do the coding only by USB or by ODB2 ?
2- Screen connector It is necessary to cut off, to cat what exactly?
3- USB connector: remove all unnecessary and turn 180 degrees?
|
Quote:
Originally Posted by eyacelg
1- what is the utility of OABR connector? coding? we can't do the coding only by USB or by ODB2 ?
2- Screen connector It is necessary to cut off, to cat what exactly?
3- USB connector: remove all unnecessary and turn 180 degrees?
|
Hi! I've read it in Russian. You can find a lot useful stuff on drive2.ru btw.
1 - coding as far as I understood, but if you start this project one cable worth it to be fixed along with the others
2 - if you look at the connector, it's made of two parts - 4pins round with "tooth" and 2pins rectangular. You need to cut off rectangular part and remove "tooth", so you can rotate and plug round connector.
3 - same as 2
Hope it helped.