Quote:
Originally Posted by negative
Quote:
Originally Posted by nisam
There are four prongs pointing straight back from the panel and couple of "hooks/hinges" at the top of it so pry from the bottom and pull towards yourself/up the prongs have grooves on them so once you pop them out its easy.
Maybe I'm mistaken about the steps but I don't see how you can skip the first and second step but this is what i do (and i cant emphasize this enough its super easy once the fear is gone if i can do it anyone can)
1 remove side panel cover (to get to the screw) and remove screw
2 pull the "wood/whatever your car has" trim
(pull towards yourself the middle vents are kinda rubber sealed so thats the only thing holding it in)
3 disconnect the connectors on the back of the trim and take it out (optional since i just pull it out and tape it to the screen using painters tape and microfiber on the screen)
4 pull the ac part out
|
Thank you for clear answer buddy.
And do you have any idea for remove the radio on/button button from ceramic to non ceramic radio unit whic attached the photo on prev. post? |
I have not (haven't tried it myself)