Quote:
Originally Posted by ifr
Most likely your VO code failed/you did something wrong as adding 1CR is the dealer method of retrofit.
However, don't bother trying unless you have the FSC code. With 1CR added to FA do u have space for the FSC? If yes then you could try and purchase one.
|
After adding 1CR I've checked the FSCs but I had only 2 FSCs under DME (as before VO coding 1CR)
They are the ones given below:
But I also think something went wrong during VO coding even Esys didn't give any errors and everything seemed fine; related parameters not changed is something I can not explain.. I'll try VO coding 1CR again
DME_BAC2[DiagAddress=18(0x12)]
RootCertStatus not available
SWSigStatus accepted
SWTApplications
----------
AppID 195(0xC3)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus not available
FSCCertStatus not available
----------
AppID 157(0x9D)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus not available
FSCCertStatus not available
In one of the remote start codes it says cars from 2018 tap lock button 3 times in 2 secs. My car is late 2017 but with a recently updated i-step 19-11 May that be a problem? Maybe intelligent key needs and update also which we can not do