Quote:
Originally Posted by roxxor
Sorry, I really don't know much about the EDP features or coding it to being active. Like I mentioned, I had enabled the ISA feature on my X3, but when I swapped laptops I lost most of the coding files I had from the X3, and I started fresh on my new laptop.
|
Thanks anyway
Quote:
Originally Posted by mrgicm
Did you try to VO code SAS with for example german version some other country?
|
I didn't actually VO coded the car because it will chage DCC into ACC which will prevent the cruise control to work so I can not test it. Instead I've used coding verification to generate CAFD files for 5AT + Germany country car and removed my country from VO list. Then I've compared all 32 files with my cars (5AS changed to 5AT) CAFD files and only difference is:
DSC: C_VFA_Funktion
SAS10: C_SWA_Vorhanden
KAFAS: VFW_AVAILABLE
KAFAS: WWA_ENABLE
BDC_BODY2: VCM_COUNTRY (mine was ECE)
KOMBI: LAENDERAUSFUEHRUNG (mine was Sonstige)
RS: C_SWW_Enable_LaneWidthAdjustmentByKAFAS
and 2 or 3 language changes in NBT and KOMBI.
So basically there seem no country restriction codes on the car
But I've updated all these codes just in case including:
DSC: C_EDP_Land_aktiv Werte=FF, FF, FF, FF
DSC: C_vSLI_Land_aktiv Werte=FF, FF, FF, FF
DSC: C_SWA_Land_aktiv Werte=FF, FF, FF, FF
SAS: C_vSLI_Land_aktiv Werte=FF, FF, FF, FF
SAS: C_EDP_Land_aktiv Werte=FF, FF, FF, FF
SAS: C_EDP_Vorausschau_aktiv Werte=FF, FF, FF, FF
SAS: C_EDP_SLI_aktiv Werte=FF, FF, FF, FF
And finally I've FDL coded all features of 5AT except iBrake and ACC functions and nothing I've tried worked
Limit Assist activated but cruise control doesn't asks to set current speed limit (no assist text on the cruise control image)