Quote:
Originally Posted by E90Fleet
1) Remove 4 screws on top of bumper ( under hood, above kidney grills)
2) Remove 2 screws in each wheelsarch, and clip bumper trim away from wheelarch trim
3)Push wheelach trim away so you can unfasten 2 screws inside holding top part of bumper too the car on each side
4) Release about 7 Screws on bottom of bumper from underneath
5) Remove bumper by uncliping each side and then pulling bumper forward
|
would there be any problem putting on a E90 M Tech bumper on a stock E90?
cheers