Hi, this is my first post on this forum. Please advise 😉
I have G30 2019 pre-LCI 530e and would like to retrofit heating steering function.
As shown in the photo, my current steering wheel is regular sports steering wheel (non M sports) with Driving Assistance Plus and Parking Assistance, therefore there is touch control (sensor), vibration generator, wheel control element, all multifunction switches and all related wiring harness is already inside
except paddle shifter and heating switch, and of course steering wheel with heating element.
After some surveys from these posts, I conclude it should stay pre-LCI steering wheel, no LCI nor M-sports. because LCI wheels has lack of vibration generator inside and if I go for M-sports, I need to buy all elements and airbags, etcs.
https://x3.xbimmers.com/forums/showp...&postcount=243
https://g30.bimmerpost.com/forums/sh...4&postcount=21
https://x3.xbimmers.com/forums/showthread.php?t=1444289
I have found such a spare part 699509604 available as shown in the photo and was wondering if it is possible to use for my purpose.
This is a standard sports steering wheel and no DA/PA but with paddles and steering wheel with heating element and the heating switch.
My plan is to move all current components into the new heated steering wheel which means airbag, touch control(sensor), vibration generator, wheel control element, multifunction switches to get steering wheel with all functions available.
Will you kindly advice this is possible or not ?
If this combination will work, my assumption is then just plug and install combined wheel, then heating steering will work after coding via BimmerCode.
But paddle shifter, I need additional wiring SLZ(pin 3) - BDC(pin 5) and VO coding (from 205 to 2TB/2TE) but this is not possible via BimmerCode.
https://www.bimmerfest.com/threads/g...s-2te.1374813/
Is my assumption correct?