Quote:
Originally Posted by Junebug85
I fitted some 50w CREE LED Pure White bulbs earlier and even coded out the bulb error warning message using BimmerCode.
I had to buy the UniCarScan OBD 2 device as my Vgate 3 wifi wss limited to what it can code on the G platform cars.
I looked through the modules but nothing was clear cut. I then went into expert mode and In the Body Domain Controller I found 3061. I remember this from when I coded the bulbs in my F30 335d.
Here's what I made Not Active:
3061 RFS_L_KALTUEBERWACHUNG = nicht aktiv
3061 RFS_L_WARMUEBERWACHUNG = nicht aktiv
3061 RFS_L_IS_LED = aktiv
3061 RFS_L_KALTUEBERWACHUNG = nicht aktiv
3061 RFS_L_WARMUEBERWACHUNG = nicht aktiv
3061 RFS_L_IS_LED aktiv
Coding successful and error gone! Even in daylight, they are quite bright
|
Apologies to it may be covered in your post..
Do you have a link for the reverse bulbs & the spacers?
Also, do they come with bolts or is that separate?
I've got the 20" alloys but RWD rather than xDrive
I've previously got the bimecc ones
Thanks