Quote:
Originally Posted by marsb007
It's a floating cap. It rotates to make it sit upright. So even if you align it with the M badge, on the first revolution it's already off.
I used a small screwdriver. Took about 3 seconds to take off each cap. Just use the screwdriver to push the cap to the opposite side and give enough of a gap to be able to wedge the tip of the screwdriver in. Then simply lift and it pops out.
|
Hah you are braver than me. I thought about putting tap on a box cutter or tiny screw driver but I said no way. The odds of it going wrong for me and scratching the rim even if I was pulling up/away from the wheel were just too high. Didn't want to risk it even if it was likely easy.