[kite81]

Hello,

My troubles started with Carly which failed coding and left my 2019 BMW G30's BDC in a bad state, with many errors in the car status, windows wouldn't roll up, no blind spot detection, no TPM, as well as other issues. I decided to try to flash the BDC to fix this (probably not a good idea). Along with the BDC I tried to flash DKOMBI & HU_NBT2.

HU_NBT2 succeeded, but BDC and DKOMBI failed. I now have a black instrument cluster. I wanted to try to VO code DKOMBI again, but it doesn't even show in Expert Mode coding as an ECU. DKOMBI is all red now in TAL Calculating as well: Rectangle Font Parallel Screenshot Software

Before I continue messing things up, I figured I'd reach out here to see if someone can help me figure out how to fix the mess I created.

Thanks in advance!

[I3LaZeN]

I can recommend a remote coder named Vick.
This is his whatsapp # +60123969654

Good luck!!

[Joe-BMW33]

Originally Posted by I3LaZeN

I can recommend a remote coder named Vick.
This is his whatsapp # +60123969654

Good luck!!

+1, save yourself some time, stress and aggravation. Call Vic. It will probably take him 15 minutes to restore the BDC.

[kubax86]

Originally Posted by kite81

Hello,

My troubles started with Carly which failed coding and left my 2019 BMW G30's BDC in a bad state, with many errors in the car status, windows wouldn't roll up, no blind spot detection, no TPM, as well as other issues. I decided to try to flash the BDC to fix this (probably not a good idea). Along with the BDC I tried to flash DKOMBI & HU_NBT2.

HU_NBT2 succeeded, but BDC and DKOMBI failed. I now have a black instrument cluster. I wanted to try to VO code DKOMBI again, but it doesn't even show in Expert Mode coding as an ECU. DKOMBI is all red now in TAL Calculating as well: Rectangle Font Parallel Screenshot Software

Before I continue messing things up, I figured I'd reach out here to see if someone can help me figure out how to fix the mess I created.

Thanks in advance!

Easily solvable.
PM sent

[prolube]

Originally Posted by kubax86

Easily solvable.
PM sent

Hi, same issue here… please help

[TheNine90]

Originally Posted by prolube

Hi, same issue here… please help

I can restore it if you are still interested.

[BMW_E_F_G]

Guys,

Did you allready fixed it? If not send me a PM. It's literaly 5 min of coding.

Hope you fixed it all!

[MrNore]

Hi guys,

I have the same issue, I recently ordered a Carly OBD and tried doing out seat belt noise. Now my car has all sorts warning on the Idrive. Please help. I’m in london. Thanks.

[MrNore]

Hi guys,

I have the same issue, I recently ordered a Carly OBD and tried doing out seat belt noise. Now my car has all sorts warning on the Idrive. Please help. I’m in london. Thanks.

[kubax86]

Originally Posted by MrNore

Hi guys,

I have the same issue, I recently ordered a Carly OBD and tried doing out seat belt noise. Now my car has all sorts warning on the Idrive. Please help. I’m in london. Thanks.

Can help remotely.

[zenek2002]

Hi, same happened to me, 2014 X5, coding BDC with VVDI2 and now flash gone, numbers dont match up, can someone please help me, whatsapp +353 83 005 8199