repair instructions 5142-26-G30

Yetello · 02-05-2025, 08:56 AM

any one familiar with or know where to find

repair instructions 5142-26-G30

want to lookup if my door card could be modified to accept the Seat facility memory switch. If all newly bought doorcards need to moded with this procedure My old one might be moded as well.

Cheers

Alscoob · 02-07-2025, 03:22 AM

Can't quite get that code but this may help. See section 6... I would expect that all cards are the same with preformed cut outs.

Name: Screenshot 2025-02-07 at 09-19-19 Replacing left or right front door trim panel.jpg
Views: 220
Size: 374.1 KB

Name: Screenshot 2025-02-07 at 09-19-19 Replacing left or right front door trim panel.jpg
Views: 220
Size: 374.1 KB

Yetello · 02-10-2025, 03:22 PM

Thanks for the reply,

I will note the chapter for future reference (ISTA available as well)

So I made the hole without the punch tool, works also. The switch might be sitting a bit tighter than when using the Punch Tool be but it's all secure and doesn't Rattle. Now to find an new connector to connect the Memory switch block. Any part number for that, Not going to buy a whole harness for that.

Alscoob · 02-13-2025, 03:22 AM

Quote:

Originally Posted by Yetello

Thanks for the reply,

I will note the chapter for future reference (ISTA available as well)

So I made the hole without the punch tool, works also. The switch might be sitting a bit tighter than when using the Punch Tool be but it's all secure and doesn't Rattle. Now to find an new connector to connect the Memory switch block. Any part number for that, Not going to buy a whole harness for that.

Have a look at RealOEM.com Latter link does show connectors for repairs so maybe one in there that is the right one?

https://www.realoem.com/bmw/enUS/sel...&prod=20191000

OR

https://www.realoem.com/bmw/enUS/par...BMW-530e&mg=61

Yetello · 02-14-2025, 02:16 PM

Quote:

Originally Posted by Alscoob

Have a look at RealOEM.com Latter link does show connectors for repairs so maybe one in there that is the right one?

Yeah no luck there. If I only had the BMW or TE Connectivity Partnumber I can probbably find it. Although it might be ristrictive to buy them, the chinese websites might have some. Only need the housing as I have plenty of terminals.

Yetello · 02-14-2025, 03:05 PM

Found an equivelant MQS socket Housing with the correct key.
Single connector might be cheaper than what is going on ebay for some used pig tails. Rediculous prices people asking for a used Pigtail.

Name: S19_1B.jpg
Views: 175
Size: 71.3 KB

Name: S19_1B.jpg
Views: 175
Size: 71.3 KB

Yetello · 05-16-2025, 02:42 PM

All installed, Switch is being recognized by the car but needs still a bit of coding to do. Now to figure out how to code it to the car.

02-05-2025, 08:56 AM	#1
Yetello Enlisted Member 11 Rep 46 Posts Drives: 2019 BMW 530E M-Sport Stage 1 Join Date: Jun 2024 Location: Connacht iTrader: (0)	repair instructions 5142-26-G30 any one familiar with or know where to find repair instructions 5142-26-G30 want to lookup if my door card could be modified to accept the Seat facility memory switch. If all newly bought doorcards need to moded with this procedure My old one might be moded as well. Cheers
	Appreciate 0 Tweet Quote

02-07-2025, 03:22 AM	#2
Alscoob Brigadier General 2727 Rep 3,585 Posts Drives: G31 540i M Sport Edition Join Date: Jun 2015 Location: UK iTrader: (0)	Can't quite get that code but this may help. See section 6... I would expect that all cards are the same with preformed cut outs.
	Appreciate 1 lanlilan111.00 Quote

02-10-2025, 03:22 PM	#3
Yetello Enlisted Member 11 Rep 46 Posts Drives: 2019 BMW 530E M-Sport Stage 1 Join Date: Jun 2024 Location: Connacht iTrader: (0)	Thanks for the reply, I will note the chapter for future reference (ISTA available as well) So I made the hole without the punch tool, works also. The switch might be sitting a bit tighter than when using the Punch Tool be but it's all secure and doesn't Rattle. Now to find an new connector to connect the Memory switch block. Any part number for that, Not going to buy a whole harness for that.
	Appreciate 0 Quote

02-14-2025, 03:05 PM	#6
Yetello Enlisted Member 11 Rep 46 Posts Drives: 2019 BMW 530E M-Sport Stage 1 Join Date: Jun 2024 Location: Connacht iTrader: (0)	Found an equivelant MQS socket Housing with the correct key. Single connector might be cheaper than what is going on ebay for some used pig tails. Rediculous prices people asking for a used Pigtail.
	Appreciate 0 Quote

05-16-2025, 02:42 PM	#7
Yetello Enlisted Member 11 Rep 46 Posts Drives: 2019 BMW 530E M-Sport Stage 1 Join Date: Jun 2024 Location: Connacht iTrader: (0)	All installed, Switch is being recognized by the car but needs still a bit of coding to do. Now to figure out how to code it to the car.
	Appreciate 0 Quote