[crogamer]

Hello everyone, this is my first post here.
I chose to FA code my DDE and DKOMBI to oil changes at 12tkm/12mon instead of the original 30tkm/24mon. Prior to that it said the oil had to be changed after 16tkm in the head unit. I FA coded the DDE and DKOMBI (I checked what ECU's needed to be coded using esys) and let the car to go to sleep. After 30ish min's I came back and reset the oil service reminder using the cluster trick and it said the oil needs to be changed in 13tkm (I think this is because I have traveled about 3tkm since last reset, so 16tkm-3tkm=13tkm). But now I changed my mind and FLD coded the DDE and DKOMBI to the settings before, so 30tkm/12mon (did this because in the main time i changed some settings in both, exa. start/stop,...), and now i can't reset the service reminder and every time i start the car a message on the kombi pops up saying service required in 13tkm. How do i fix this to be like it was before, i don't think it should display this message every time i start the car especially since its not even close to needing to reset. Oh and the date is in 2026 sometime so the date is not the problem.

[lnxguy]

I would default code those modules and start again. You obviously messed something up.

[crogamer]

Originally Posted by lnxguy

I would default code those modules and start again. You obviously messed something up.

So just upload the original FA and right click module and press code?

[lnxguy]

That should be all that's required.