[ak47sh]

My tires have been running low on tread and one of my wheels have had a slight bend (only slightly noticible at 90mph+) for a while now. Since I have to get new tires soon anyways I figured might as well get new wheels. I would also like to lower the car on H&R springs, they are cheap and work well from what i've read. I want my car to look good, drive smooth, and look good

I'm planning on getting Michelin Pilot Sport 4 AS and running a square setup regardless. When I do drop the car on H&R springs I want the fitment to be flush or near flush. I am leaning towards 19 inch wheels but if y'all can convince me to get 20s (most concerned about ride quality, but i've heard its negligble with non RFTs) I can work with that.

My dilema is which wheels I should get. I was eyeing HRE ff10s but I feel like they would look like theres too much going on for a g30. Also was looking at Vossen hf-7s and might be leaning towards these. But most importantly is what color wheels. My car is CQM (champagne quartz metallic) and I don't know what color wheels would look the best. I've been debating wrapping the car satin black, but i'm not set on that yet so I want the color to be interchangable between cqm and satin black.

ANY ADVICE HELPS!! sorry if asking for too much

TLDR; what color and size and style wheels look best on a cqm g30

[rsc1]

My vote would be silver HREs, but either wheel would look fantastic on a lowered car with flush fitment. You'd def need to run spacers in the rear if you want to run a square setup though.

[VFJon]

Wanted to share this:

Volare Forged
VF008
Brushed clear
19" staggered setup

[335xirookie]

Just another option. 20s staggered

[ak47sh]

Originally Posted by rsc1

You'd def need to run spacers in the rear if you want to run a square setup though.

It's running a square setup right now, why do you think i'd need spacers in the rear? I'm also planning on doing 20x9 et 25 with 255/35 all around, do you think will that be fine?

I'm using this as a reference, i'm pretty sure this is what im running right now
245/40R19 98H 8Jx19 ET30
https://www.wheel-size.com/size/bmw/...0i-xdrive--335

[rsc1]

Originally Posted by ak47sh

It's running a square setup right now, why do you think i'd need spacers in the rear? I'm also planning on doing 20x9 et 25 with 255/35 all around, do you think will that be fine?

I'm using this as a reference, i'm pretty sure this is what im running right now
245/40R19 98H 8Jx19 ET30
https://www.wheel-size.com/size/bmw/...0i-xdrive--335

I meant to achieve flush fitment but with that offset you might actually be pretty close. 20x9 ET25 is recommended on Apex Wheels' website as one of the square options so should work fine. They however recommend 255/30 for tires with that setup.

https://apexwheels.com/fitment-guide...-fitment-guide

[walterm321]

Originally Posted by ak47sh

My tires have been running low on tread and one of my wheels have had a slight bend (only slightly noticible at 90mph+) for a while now. Since I have to get new tires soon anyways I figured might as well get new wheels. I would also like to lower the car on H&R springs, they are cheap and work well from what i've read. I want my car to look good, drive smooth, and look good

I'm planning on getting Michelin Pilot Sport 4 AS and running a square setup regardless. When I do drop the car on H&R springs I want the fitment to be flush or near flush. I am leaning towards 19 inch wheels but if y'all can convince me to get 20s (most concerned about ride quality, but i've heard its negligble with non RFTs) I can work with that.

My dilema is which wheels I should get. I was eyeing HRE ff10s but I feel like they would look like theres too much going on for a g30. Also was looking at Vossen hf-7s and might be leaning towards these. But most importantly is what color wheels. My car is CQM (champagne quartz metallic) and I don't know what color wheels would look the best. I've been debating wrapping the car satin black, but i'm not set on that yet so I want the color to be interchangable between cqm and satin black.

ANY ADVICE HELPS!! sorry if asking for too much

TLDR; what color and size and style wheels look best on a cqm g30

Not sure if you'd be interested but I'm selling my brand new Tarmac HRE FF28's mounted on new PS4 AS's with new TPMs. 20x9's with 255/30/20 & 20x10's with 285/35/20. I was going to post them in the classified section early next week. I just had everything put on 1 1/2 weeks ago and have less than 150 miles on them. It just ended up not being the look I was hoping for. I have almost $5k in them and am looking to get $4k. I live in MD (see you're in NOVA). They're a perfectly flush fitment with no spacers needed. I also have brand new unopened MSS adjustable springs that I was going to return if you were looking for them too....

[ak47sh]

Originally Posted by walterm321

Not sure if you'd be interested but I'm selling my brand new Tarmac HRE FF28's mounted on new PS4 AS's

I actually just bought liquid metal hre ff10s last night oml. I would've been interested had I known but just a day too late my friend

[walterm321]

Originally Posted by ak47sh

I actually just bought liquid metal hre ff10s last night oml. I would've been interested had I known but just a day too late my friend

Story of my life. Day late and a dollar short!! Enjoy your new set up

[ak47sh]

idrk how to take pics lmao, but here are some if anyone's interested.

hre ff10 20x9 with michelin PSAS4's 255/35/20 all around on stock ride height

[jiggyboiswagg]

Went through a similar dilemma earlier this month! I switched over to Rohana’s (per tire shop rec and bunch of ppl on m550 Facebook group). So happy with how it turned out.

Front 20x9 et25
Rear 20x10 et43

[rsc1]

Originally Posted by jiggyboiswagg

Went through a similar dilemma earlier this month! I switched over to Rohana’s (per tire shop rec and bunch of ppl on m550 Facebook group). So happy with how it turned out.

Front 20x9 et25
Rear 20x10 et43

That looks awesome. You need some painted (or wrapped) reflectors to complete the stealth look!

[LuckyL]

Originally Posted by VFJon

Wanted to share this:

Volare Forged
VF008
Brushed clear
19" staggered setup

Attachment 3555073

Attachment 3555074

This is the exact set up I want (fitment-wise) for my 540i. Are you running spacers or just staggered and lowered? What’s the front and rear widths you got here because it’s perfect - also offset? I have MSS springs on the way but I really want to make sure I pull the trigger on the right rims.