[arkhi]

Originally Posted by yreiser

In my LCI, the coding parameters where slightly different from the one posted here. I compared the default values between FA 248 and FA without 248 and these are the final changes for heated steering wheel in my LCI:

BDC_BODY3:
CODDT_BYTE_00_LRE_LIN: nicht aktiv -> LHZ_RHE_mit_TASTER
CTRL_HOD_CODG_STWH_LIN: nicht verbaut -> verbaut
LHZ_CCM_IKF: nicht aktiv -> aktiv
LIN_VARIANTE_LRE: lre_tlc -> lre_tlc_lhz_taster
LRE_LHZ_VERBAUT: nicht aktiv -> aktiv

HU_MGU:
SVS_CONTROL_LENKRADHEIZUNG: nicht_aktiv -> aktiv
AKT_AUTO_LENKRADHEIZUNG: nicht aktiv -> aktiv

For LCI, the coding are as follows:
BDC_BODY3:
• LIN_VARIANTE_LRE: lre_tlc (03) -> lre_tlc_lhz_taster (05)
• LRE_LHZ_VERBAUT: nicht_aktiv (00) -> aktiv (01)
• CODDT_BYTE_00_LRE_LIN: nicht_aktiv (00) -> LHZ_LRE_mit_TASTER (03)
• CTRL_HOD_CODG_STWH_LIN: nicht_verbaut (02) -> verbaut (01)

HU_MGU:
• SVS_CONTROL_LENKRADHEIZUNG: nicht_aktiv (00) -> aktiv (01)

[Bosniak]

Originally Posted by roxxor

As one of the people who did it on the F30, yes, it would most definitely be doable on the G30, and most likely easier as all of the wiring should be in place and the button for it is on the steering wheel instead of the steering column housing.

Biggest question I think to ask is, does your car now already have the features like Lane Departure or Blind Spot where the steering wheel vibrates? If so, then you already have the right wiring in place. You would just need to find the heated wheel that also has the vibration motor, then swap them, then just code the car with option 248 for the heated steering wheel.

Right okay, no thats perfect for me, because I dont want the heating element there. Planing on rewrapping the steering wheel, and I would have to remove the heating element anyway, but I feared that I would damage something by removing it. Great news, thank you!