[Vpunch]

Hello everyone i have the flowing problem
i have change the kombi on a g30 and it have flash it and it works i have married the ecus (kombi atm and MGU ) and it appers componnet protection the kombi is black out but it works on ista i can read all the funcions. So i have put virgin the mgu. when i was reading the VCM didnt apper the kombi so i have write svt. now Sometimes apper when i trie to code it will disappiar.

Any one can help me ?

[Vpunch]

The Kombi was virgin

[Vpunch]

<Caf's suchen>
TAL calculation started.
Locally NCD signature calculation started
Processing ncd signing finished
TAL execution started.
<>
Read SVT before TAL execution started.
Read SVT before TAL execution finished.
TAL execution started.
<ExecutionID=2024/04/18-11:41:05.153>
<[] prepareTALExecution started [PROGRESS]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForCoding started [PROGRESS]>
<[] prepareVehicleForCoding finished [PROGRESS]>
<[DKOMBI4 - 60] prepareECUforCoding started [PROGRESS]>
<MCDDiagService<id=230900, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding , service=DSC - DiagnosticSessionControl, description=error: timeout, link=DKOMBI4_60_ETHERNET> [DIAGSERVICE]>
<[DKOMBI4 - 60] prepareECUforCoding finished [PROGRESS]>
<[DKOMBI4 - 60] authenticateECUforCoding started [PROGRESS]>
<[DKOMBI4 - 60] authenticateECUforCoding finished [PROGRESS]>
<[DKOMBI4 - 60 - cafd_00004508-006_000_102] Transaction type: cdDeploy; Message: TA started [TRANSACTION]>
<[DKOMBI4 - 60 - cafd_00004508-006_000_102] Transaction type: cdDeploy; Message: TA finished [TRANSACTION]>
<[DKOMBI4 - 60] finalizeECUCoding started [PROGRESS]>
<[DKOMBI4 - 60] finalizeECUCoding finished [PROGRESS]>
<[] finalizeVehicleCoding started [PROGRESS]>
<[] finalizeVehicleCoding finished [PROGRESS]>
<[] finalizeTALExecution started [PROGRESS]>
<[] finalizeTALExecution finished [PROGRESS]>
<TAL execution finished [TAL_EXECUTION_FINISHED]>
TAL-Execution finished with status: "FinishedWithWarnings".
TAL execution finished. Duration: "19s".
<>
Read SVT after TAL execution started.
Read SVT after TAL execution finished.
VCM Update: Write FA to VCM.
VCM Update: Write FP to VCM.
VCM Update: Read current SVT.
VCM Update: Check current SVT with TAL.
VCM Update: finished with error.
<Error in VCM Update:>
<No ECU found in SVT with base variant "DKOMBI4" and diagnostic address "96" ("60"). [C177]>
TAL execution finished.

[Bjames93*]

Originally Posted by Vpunch

<Caf's suchen>
TAL calculation started.
Locally NCD signature calculation started
Processing ncd signing finished
TAL execution started.
<>
Read SVT before TAL execution started.
Read SVT before TAL execution finished.
TAL execution started.
<ExecutionID=2024/04/18-11:41:05.153>
<[] prepareTALExecution started [PROGRESS]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForCoding started [PROGRESS]>
<[] prepareVehicleForCoding finished [PROGRESS]>
<[DKOMBI4 - 60] prepareECUforCoding started [PROGRESS]>
<MCDDiagService<id=230900, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding , service=DSC - DiagnosticSessionControl, description=error: timeout, link=DKOMBI4_60_ETHERNET> [DIAGSERVICE]>
<[DKOMBI4 - 60] prepareECUforCoding finished [PROGRESS]>
<[DKOMBI4 - 60] authenticateECUforCoding started [PROGRESS]>
<[DKOMBI4 - 60] authenticateECUforCoding finished [PROGRESS]>
<[DKOMBI4 - 60 - cafd_00004508-006_000_102] Transaction type: cdDeploy; Message: TA started [TRANSACTION]>
<[DKOMBI4 - 60 - cafd_00004508-006_000_102] Transaction type: cdDeploy; Message: TA finished [TRANSACTION]>
<[DKOMBI4 - 60] finalizeECUCoding started [PROGRESS]>
<[DKOMBI4 - 60] finalizeECUCoding finished [PROGRESS]>
<[] finalizeVehicleCoding started [PROGRESS]>
<[] finalizeVehicleCoding finished [PROGRESS]>
<[] finalizeTALExecution started [PROGRESS]>
<[] finalizeTALExecution finished [PROGRESS]>
<TAL execution finished [TAL_EXECUTION_FINISHED]>
TAL-Execution finished with status: "FinishedWithWarnings".
TAL execution finished. Duration: "19s".
<>
Read SVT after TAL execution started.
Read SVT after TAL execution finished.
VCM Update: Write FA to VCM.
VCM Update: Write FP to VCM.
VCM Update: Read current SVT.
VCM Update: Check current SVT with TAL.
VCM Update: finished with error.
<Error in VCM Update:>
<No ECU found in SVT with base variant "DKOMBI4" and diagnostic address "96" ("60"). [C177]>
TAL execution finished.

Hi we can help pm