06-02-2023, 03:49 AM | #1 |
New Member
0
Rep 14
Posts |
Im not knowledgeable when it comes to wheels/tires. I have a ‘21 M550i, currently with 20” 846M Performance wheels.
Current Wheel Specs (846M): Front: 20x8 +30 Rears: 20x9 +44 I found some wheels for sale with the following specs: Front: 20x9 +35 Rears: 20x10 +42 I’ll also be buying new tires to fit these wheels. My question is, would the sizes I found for sale work on my G30? |
06-04-2023, 03:47 PM | #2 |
Brigadier General
1254
Rep 4,088
Posts |
They would work nicely. If you added a 5mm spacer to the fronts you would end up with a +13mm space-OUT on front and +15mm rear relative to stock, which is a nice compromise between flush and flinging dirt on your doors.
If you wanted to go more aggressive you can do 8mm spacers on the front and 3mm on the back, resulting in +16mm front and +18mm rear, which is pretty much flush. Last edited by ashmostro; 06-04-2023 at 03:53 PM.. |
Appreciate
0
|
06-04-2023, 03:54 PM | #3 |
Brigadier General
1254
Rep 4,088
Posts |
Also make sure the PCD (where the bolt holes are) and the hub diameter are correct for our cars.
PCD should be 5x112mm and centerbore should be 66.6mm |
Appreciate
0
|
06-06-2023, 07:38 PM | #6 |
New Member
0
Rep 14
Posts |
Plan on going up a tire size, the tires they came with are a size smaller than what HRE recommends foe these.
Currently on 275/30/20 + 245/35/20 Will get 285/30/20 + 255/35/20 once these tires wear out, which should be in another 5-6k miles. |
Appreciate
0
|
06-24-2023, 01:47 PM | #8 |
Private First Class
29
Rep 114
Posts |
Do you mind sharing what you picked them up for $?
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|