[Herki]

Hello,
I just bought an enet cable and lightning adapter to my iphone is possible to change color and brightness ambients light brighter than standard by BimmerCode? I had before vgate adapter and Samsung s9 and I haven’t got acces to do it.

[GaSelle]

Not sure if that will work; I just use one of the "approved" BT-dongles with Bimmercode.

I take that you know, that the brightness for the ambient lights can be adjusted in the menu; do you want them even brighter than the maximum setting?

[Herki]

in a few photos I saw a brighter light but maybe it just looked like it in the photo

[raduron10]

Originally Posted by Herki

Hello,
I just bought an enet cable and lightning adapter to my iphone is possible to change color and brightness ambients light brighter than standard by BimmerCode? I had before vgate adapter and Samsung s9 and I haven’t got acces to do it.

Yes it works fine with Enet Cable and RJ45 adapter, I have changed the color on mine. Keep in mind that you can only edit the first color from the list on the idrive and although it will show the default color in the idrive menu in reality it will illuminate with the color chosen in the bimmercode app.

I don't remember an option to further adjust the brightness with bimmercode.

[Herki]

Ok thanks, you coded it in expert mode ?

[Kosmic]

Works fine. you can coded in normal mode.

[Herki]

So is possible to change ambient lights too
And bottoms right, like on this photos?
<img src="https://pasteboard.co/JHrwzjO.png">

[ejlover06]

Originally Posted by Herki

So is possible to change ambient lights too
And bottoms right, like on this photos?
<img src="https://pasteboard.co/JHrwzjO.png">

Yes you can. Bimmercode has 2 settings for upper and lower strips.

To change the rest of the color options you need to use the expert mode and code the colors in Hex format.

BTW, you can not change the brightness of the LEDs even in expert mode.

There are 3 LEDs on the strips: Red Blue and Green. Entering hex values between 00-FF adjust the brightness of each LED, hence selects the final color. FF is the most bright setting. if you enter FF FF FF all 3 will light on at full brightness and theoretically should give a white color which is the brightest light u can ever get from the LEDs. But, on G30 FF FF FF results in slight pinkish color

[Herki]

Originally Posted by ejlover06

Yes you can. Bimmercode has 2 settings for upper and lower strips.

To change the rest of the color options you need to use the expert mode and code the colors in Hex format.

BTW, you can not change the brightness of the LEDs even in expert mode.

There are 3 LEDs on the strips: Red Blue and Green. Entering hex values between 00-FF adjust the brightness of each LED, hence selects the final color. FF is the most bright setting. if you enter FF FF FF all 3 will light on at full brightness and theoretically should give a white color which is the brightest light u can ever get from the LEDs. But, on G30 FF FF FF results in slight pinkish color

Ok thanks, you know where I can find tutorial how to do it ?

[ejlover06]

Originally Posted by Herki

Ok thanks, you know where I can find tutorial how to do it ?

For the RGB color codes you can use this site to have a general idea:
https://www.rapidtables.com/convert/...gb-to-hex.html


And for the coding go into the expert mode in Body Domain Controller and search for ambiente. A series of long line of codes are the ones related with the RGB profiles of ambient lights

[DBV1]

Originally Posted by raduron10

Yes it works fine with Enet Cable and RJ45 adapter, I have changed the color on mine. Keep in mind that you can only edit the first color from the list on the idrive and although it will show the default color in the idrive menu in reality it will illuminate with the color chosen in the bimmercode app.

I don't remember an option to further adjust the brightness with bimmercode.

Thanks - that is really interesting. So, I had changed mine about a month ago, just added one new setting.

So, if I am understanding correctly the new color will not show, but if I select the first color on the iDrive menu, it will be the color I coded? I was wondering what happened.

[raduron10]

Originally Posted by DBV1

Thanks - that is really interesting. So, I had changed mine about a month ago, just added one new setting.

So, if I am understanding correctly the new color will not show, but if I select the first color on the iDrive menu, it will be the color I coded? I was wondering what happened.

Yes exactly, I have only used Bimmercodes's normal mode and that is how it works.
I cannot say anything about expert mode as I haven't tried it.

[540iSUP]

I really wish BimmerCode would put up more options to change on easy mode than just Bronze.