[23109VC]

I have a 2018 M550I that is completely stock. I am considering installing wheel spacers when I look at the car from the rear or rear angles I noticed the rear wheels especially seem slightly sunken in and I believe the car would look better if the rear wheels and front wheels were pushed out just a little bit.

Just from my visual estimation I'm thinking maybe 10 mm definitely nothing extreme I'm curious if any of you have purchased wheel spacers for a stock vehicle that is not lowered and had pictures.

[blackoutF15]

Originally Posted by 23109VC

I have a 2018 M550I that is completely stock. I am considering installing wheel spacers when I look at the car from the rear or rear angles I noticed the rear wheels especially seem slightly sunken in and I believe the car would look better if the rear wheels and front wheels were pushed out just a little bit.

Just from my visual estimation I'm thinking maybe 10 mm definitely nothing extreme I'm curious if any of you have purchased wheel spacers for a stock vehicle that is not lowered and had pictures.

I have a set of 15mm H&R spacers that I used on my F15 X5 for about a month with 500 miles on them approximately. I believe they are compatible for the 5. Let me know if you're interested. Thanks

[hoyas490]

Originally Posted by 23109VC

I have a 2018 M550I that is completely stock. I am considering installing wheel spacers when I look at the car from the rear or rear angles I noticed the rear wheels especially seem slightly sunken in and I believe the car would look better if the rear wheels and front wheels were pushed out just a little bit.

Just from my visual estimation I'm thinking maybe 10 mm definitely nothing extreme I'm curious if any of you have purchased wheel spacers for a stock vehicle that is not lowered and had pictures.

Just installed 12mm front and 15mm rear spacers on my 2021 M550i this afternoon

Thinking I'm regretting going small up front and kinda want to move my 15mm to the front and get 18mm or 20mm for the rear. But I'm going to drive on it for a month or so and then decide, though likely will just be lazy and keep these as is.

Hope this info and pictures help!

[Boosted_8]

I was quite conservative with 10mm front and 13mm rear due to the fact that the scrub angle and suspension arm moments start to get screwed up with bigger spacers.

It has improved the stance to the degree I wanted, however tight turns with a lot of steering lock dont feel great.

I think the front toe and camber settings should be tweeked to compensate now.

[23109VC]

Originally Posted by Boosted_8

I was quite conservative with 10mm front and 13mm rear due to the fact that the scrub angle and suspension arm moments start to get screwed up with bigger spacers.

It has improved the stance to the degree I wanted, however tight turns with a lot of steering lock dont feel great.

I think the front toe and camber settings should be tweeked to compensate now.

Looks nice. Where did you get your spacers?

Any other pics from the rear angles ?

[FoxberryJam]

LOOKS NICE!

[AddyDaddy]

Want to say 10's front and 15's rear from burger I did it week that I got car in 2019 so can't quite remember exactly last pic is before spacers