01-22-2023, 01:37 PM | #45 | |
Captain
472
Rep 888
Posts
Drives: 2019 M550i
Join Date: Aug 2018
Location: Tampa Bay
|
Quote:
Does anyone know what the square plastic sticker is for and what the brown/copper sticker with a wire is for on the inside?
__________________
|
|
Appreciate
0
|
01-22-2023, 05:14 PM | #46 |
Captain
617
Rep 929
Posts |
I believe the square sticker is to close the hole if you don’t have high bean detection.
The cooper one looks like it has circuit traces, not sure if that is left over from manufacturing or something else. |
Appreciate
0
|
01-23-2023, 09:37 AM | #47 |
Captain
472
Rep 888
Posts
Drives: 2019 M550i
Join Date: Aug 2018
Location: Tampa Bay
|
thats weird, my car does have high beam assist but no sensor behind the rear view.
__________________
|
Appreciate
0
|
01-23-2023, 11:06 AM | #48 | |
Captain
617
Rep 929
Posts |
Quote:
What is the large rectangle hole in the camera housing for? Also what is the black adhesive square for? Hello, if the original car has an automatic beam. Then there is no need to cover the square hole. If not, it can be covered with tape By FiTCAMX Brand Store SELLER on June 7, 2022 I think I will just leave the square hole open. |
|
Appreciate
0
|
01-24-2023, 08:41 AM | #49 |
Lieutenant
336
Rep 471
Posts |
The copper sticker is the WiFi antenna.
If you have forward facing cameras you won't have a high beam sensor, so that square hole will be open and you use the black plastic to cover it. Otherwise you have a giant hole that will clearly be visible looking into the front of the car. Rear camera has been talked about before. Plenty of room for it with the power sunshade. |
Appreciate
1
w1zk1d34.50 |
01-24-2023, 10:09 AM | #50 | |
Captain
472
Rep 888
Posts
Drives: 2019 M550i
Join Date: Aug 2018
Location: Tampa Bay
|
Quote:
__________________
|
|
Appreciate
0
|
06-22-2023, 10:42 PM | #51 | |
New Member
7
Rep 11
Posts |
How did you run wire from rear to front to connect the dashcam?
Quote:
Thanks!! |
|
Appreciate
0
|
06-23-2023, 01:40 PM | #52 |
Lieutenant
209
Rep 494
Posts |
When I ran the wires for my dash cam, I was able to sneak the wires up behind the headliner by peeling back the molding over the front and rear passenger doors. I had to use a coat hanger to fish the wires over the front seat belt. You can remove the front A-pillar trim easily enough, and you can fish or squeeze the wire behind the rear pillar trim and headliner above the rear window. It wasn't too hard to do.
|
Appreciate
1
w1zk1d34.50 |
10-13-2023, 06:05 AM | #53 |
First Lieutenant
281
Rep 387
Posts |
Kinda thinking about getting one of these... Is the consensus still that this is the best OEM looking solution for the G30?
__________________
2020 540i MSport | Alpine White | Mocha Nappa | Aluminum Rhombicle | Exec Pkg | Luxury Seating | Bowers & Wilkins | Parking Assistance Pkg | MSport Brakes | Ceramic Controls | Space Saver Spare |
|
Appreciate
0
|
10-13-2023, 06:16 AM | #54 | |
Lieutenant
505
Rep 501
Posts |
Quote:
I have a referral link for anyone that needs! https://fitcamx.com/?sca_ref=1347118.GKzbwMFcaZ |
|
Appreciate
1
w1zk1d34.50 |
01-19-2024, 01:50 PM | #56 |
Just here to learn.
35
Rep 41
Posts |
I'm thinking about ordering this FITCAMX dash cam because I'm liking that oem fit. However, it looks like if using a radar detector (R4) + blend mount, the dash cam would be in the way. Has anyone coupled this with a Radar Detector+blend mount that is also mirror tapped? I assume you can still wire tap a radar detector together with this dash cam but just want to make sure.
UPDATE: I ordered this for myself and for my wife's car as well. Going to install it first then mirror tap the Uniden R4s for each. Not sure which mount I am going to use. Will decide once the dashcams are installed. CONFIRMED: You can wiretap in addition to the FITCAMX.
__________________
2001 BMW E39 M5
2014 BMW 535d xDrive 2014 Audi Q7 TDI Prestige S Line 2020 Audi SQ7 Prestige 2020 BMW M550i xDrive Last edited by w1zk1d; 02-04-2024 at 11:45 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|