11-09-2020, 07:11 AM | #1 |
New Member
5
Rep 8
Posts |
NAV wont load after Bimmercode coding, FSC codes cancelled
Hi
I have a 2017 G30 with NBT EVO iDrive 6 I tried to make a couple of changes using Bimmercode including Video in motion and Video vis USB and it failed. I restored the config but now my Navigation just stays on loading. I tried a factory reset and then a software update from Connected Drive but no joy. I had recently installed a map update which I downloaded from BMW connected drive so I tried inserting this USB again to reinstall map but it says tells me to insert a USB drive with the correct activation code. Tried downloading a new one but same thing I then looked on the FSC page in Bimmercode and the following four items that used to be green and said accepted are now in red and say cancelled... NBT Navi Application Harman EVO ID5 European Map Speesh NLU Speech TTS Dont know if its relevant but on this page the code under "EVO ID5 European Map" says ends in 4C but on the map update I got from BMW there is a .FSC file that ends in 5E. I have a connected drive subscription if that helps Can anyone please help ? Thanks Last edited by smint1; 11-09-2020 at 07:22 AM.. |
11-24-2020, 02:13 AM | #3 | |
Registered
0
Rep 3
Posts |
Quote:
I have the exact same issue. Did you ever get this sorted? |
|
Appreciate
0
|
11-24-2020, 03:48 AM | #4 |
First Lieutenant
181
Rep 360
Posts |
I had the same issue the other night, where the coding failed and the iDrive screen failed to start after that. I restored the coding from backup, and then the screen was back on. Navigation said the very same thing, "loading" and to insert an USB stick with the right codes. I tried the one with the most recent maps on it, and that worked. It installed the maps, and has been working fine since.
__________________
´22 iX3 M Sport "Charged" - Cashmere Silver
´22 Mini Cooper SE "Yours Trim" - Island Blue |
Appreciate
0
|
11-24-2020, 04:13 AM | #5 | |
Registered
0
Rep 3
Posts |
Quote:
|
|
Appreciate
0
|
01-02-2021, 02:29 AM | #6 |
New Member
5
Rep 6
Posts |
Did you solve this? I had the same problem and had to buy new FSC code from “the internet”.
Last edited by robinio; 01-02-2021 at 02:35 AM.. |
Appreciate
0
|
01-10-2021, 03:28 PM | #7 |
Brigadier General
1792
Rep 3,059
Posts |
Actually there is no need to buy new codes. You can put FSC codes from repair pack (OEM).
__________________
Apple CarPlay Fullscreen for NBTEVO / ENTRYNAV2 / Anti-Dazzle F/G
CS FLASH G8X /GTS FLASH F8X / F8X Ultimate PACK / NBTEVO iDrive 6 FLASH iDrive Firmware Update + CarPlay Fullscreen -> Video Process Visit BIMMER-REMOTE.com - 10% OFF with BIMMERPOST_10 promocode info@bimmer-remote.com or PM |
Appreciate
0
|
06-08-2021, 01:34 AM | #8 |
New Member
4
Rep 11
Posts |
I am having exactly the same issue on my 2017 G30. Additionally voice control is not working and when I long press it is telling me that there is another Bluetooth in progress.
|
Appreciate
0
|
07-07-2021, 07:10 AM | #9 |
Enlisted Member
17
Rep 44
Posts |
|
Appreciate
0
|
12-28-2022, 10:31 AM | #10 |
Colonel
162
Rep 2,399
Posts |
hi where can i get this? i have same issue when coding with bimmercode. HU went black and when restored i have lost my maps and car is telling me to insert usb with activation code
|
Appreciate
0
|
12-28-2022, 02:42 PM | #11 |
Brigadier General
1792
Rep 3,059
Posts |
PM sent
__________________
Apple CarPlay Fullscreen for NBTEVO / ENTRYNAV2 / Anti-Dazzle F/G
CS FLASH G8X /GTS FLASH F8X / F8X Ultimate PACK / NBTEVO iDrive 6 FLASH iDrive Firmware Update + CarPlay Fullscreen -> Video Process Visit BIMMER-REMOTE.com - 10% OFF with BIMMERPOST_10 promocode info@bimmer-remote.com or PM |
Appreciate
0
|
11-27-2023, 04:00 AM | #12 |
Registered
0
Rep 1
Posts |
|
Appreciate
0
|
12-06-2023, 12:19 PM | #13 |
New Member
0
Rep 5
Posts |
Hi guys, I have a similar problem and I would appreciate if someone could help me out. I got a recall regarding EGR and I took the car where they told that they need to recode the car first and informed me that I will lost all custom coding like CarPlay, Speed Limit Detection, Start/Stop memmory and etc.
But when I took the car they told that I lost the navigation. I've asked for a document what I've lost and they gave me this info: BMW Apps M Laptimer Apple Carplay Also I saw a notification about : Programming Deactivates the functions controlled by sweeping technology (SWT). Reactivations via ISTA is not possible. During programming all activation codes are deactivated for the following units: HU-H - Headunit High It is recommended to cancel the measures plan (software update) Now I see the Loading sign on the Navigation box and my MAP and NAV buttons are not working. The car was bought with Navigation System Professional. Not sure if it's connected but I have aftermarket Front and Back camera, and now the Back camera is not working, while the front is still working as intended. Can someone help? Thanks! |
Appreciate
0
|
12-21-2023, 01:29 PM | #15 |
New Member
0
Rep 5
Posts |
I was able to get most of the issues fixed. When I reinstalled Carplay the native navigation also started working and I’ve reqctivated SLI and Start/Stop memory.
I still have the problem with my reverse camera that’s not working. I tried switching the reverse camera with the front and I saw that the reverse started working when putting the car in Drive which tells me that the cables are not broken and the camera is working. I wonder if the software update made something that wouldn’t send power to the back camera when in reverse , does anyone has some ideas? |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
bimmercode, e-sys, esys, fsc, fsc codes, navigation dead |
|
|