[ginc022]

My G30 did not come with the Executive Package, one of the things I was missing was the Gesture Control option.I found on ebay FZD roof module with camera and I replaced it with mine.I pulled and connected the two wires CAN H and CAN L to the BDC module.
Now I have a problem encoding the FZD module.I use ENET cable and E-SYS 3.30.1 and psdzdata 4.32.33.
I was able to add option 6U8 to the FA and activate it,but when I follow the instructions to add the Cafd files I get an error message when I click “detect CAF for SWE.”I was able to successfully identify the istep, but when I click Expert mode>coding>Read ECU and then click on FZD from the list>detect CAF for SWE I get this... failed to get CAF for SWE "swfl_00002f48-003_027_000"
When I look in the swfl folder I don't have this file.
Does anyone have this file in their psdzdata folder and whether he can send it to me.
I tried to flash FZD ecu but when it should start to fleshing new dump they will not.Constantly shows 0% and then terminates.
Can anyone help me how to solve this problem?
Thank you...

[CaboM4]

what PSdZDATA set are you using? FULL, not lite correct? What is the ISTEP version you are targeting?

[CaboM4]

it's hard to tell from your photos ... i think ISTEP is: S15A-20-03-569 ??

This should be contained in PSdZDATA Full 4.23.22

[ginc022]

Yes friend I use PSdZDATA Full 4.23.22 and ISTEP is: S15A-20-03-569.
I also tried the older version 4.11.20 and I get the same error.

[CaboM4]

Originally Posted by ginc022

Yes friend I use PSdZDATA Full 4.23.22 and ISTEP is: S15A-20-03-569.
I also tried the older version 4.11.20 and I get the same error.

Please give me a clear picture of your ISTEP build and current versions. I have checked all psdzdata below and I can't find it .... I wonder if this is from a much older psdzdata set. I likely have it, but don't want to keep downloading from my cloud storage 75+GB 7z datasets trying to find the needle in a haystack

Versions checked:
4.34.25
4.32.20
4.31.31
4.31.12
4.27.331
4.21.32

The remaining older FULL PSdZDATA sets I have are:
4.15.12
4.10.21
4.05.22
3.63.3
3.55
3.51.3
2.54
2.53.5
2.52.5
2.51.3

[mrgicm]

Try to manually edit svt_ist to 000 swfl then try to flash it. It should work

[ginc022]

Originally Posted by mrgicm

Try to manually edit svt_ist to 000 swfl then try to flash it. It should work

Can you explain to me a little better.Which files exactly do you mean to edit 000?Today I will try to flash with psdzdata 4.33.31.