[EliGatsby132]

Hello,
I am a complete newbie and I would like to revert my 2017 G30's ECU to factory VO. I have found forums that I just need to confirm a few things.

1.
https://www.bimmerfest.com/threads/c...-links.983244/
This link is very detailed but are these versions current enough to just reset G Series ECU? If I need BimmerUtility later on to code the HeadUnit, I will just get the license now. But these are the versions that are given in the guide/links:
- Esys v3.39.1
- BimmerUtility (Mapping v. 4.35.21)
- PSdZ Data_Lite v4.35.21.7z

2.Does BimmerUtility substitute LauncherPro? Or would I need both and which version of LaunchPro?

3.
https://blog.uobdii.com/bmw-vo-codin...nd-enet-cable/
Can you confirm if this is how I can reset my FA to factory.

Thank you all for the help and these forums saved me a couple of times.

[Wojti_]

Originally Posted by EliGatsby132

Hello,
I am a complete newbie and I would like to revert my 2017 G30's ECU to factory VO. I have found forums that I just need to confirm a few things.

1.
https://www.bimmerfest.com/threads/c...-links.983244/
This link is very detailed but are these versions current enough to just reset G Series ECU? If I need BimmerUtility later on to code the HeadUnit, I will just get the license now. But these are the versions that are given in the guide/links:
- Esys v3.39.1
- BimmerUtility (Mapping v. 4.35.21)
- PSdZ Data_Lite v4.35.21.7z

2.Does BimmerUtility substitute LauncherPro? Or would I need both and which version of LaunchPro?

3.
https://blog.uobdii.com/bmw-vo-codin...nd-enet-cable/
Can you confirm if this is how I can reset my FA to factory.

Thank you all for the help and these forums saved me a couple of times.

check this
http://tokenmaster.blogspot.com/

[Almaretto]

Originally Posted by EliGatsby132

Hello,
I am a complete newbie and I would like to revert my 2017 G30's ECU to factory VO. I have found forums that I just need to confirm a few things.

1.
https://www.bimmerfest.com/threads/c...-links.983244/
This link is very detailed but are these versions current enough to just reset G Series ECU? If I need BimmerUtility later on to code the HeadUnit, I will just get the license now. But these are the versions that are given in the guide/links:
- Esys v3.39.1
- BimmerUtility (Mapping v. 4.35.21)
- PSdZ Data_Lite v4.35.21.7z

2.Does BimmerUtility substitute LauncherPro? Or would I need both and which version of LaunchPro?

3.
https://blog.uobdii.com/bmw-vo-codin...nd-enet-cable/
Can you confirm if this is how I can reset my FA to factory.

Thank you all for the help and these forums saved me a couple of times.

VO coding does not require a token. So, all you need is Psdzdata and E-sys.