[rG-tom]

interesting to know if a 255 still fits without fouling with the 12mm spacer.

[Seanjr525]

Originally Posted by Cincy330i

Bought a brand new set of gloss black 706M wheels/tires from a friend. My m550i is at the shop now trying to make these fit. Here are the issues we found. m5 tire package 275/35/20 +28 (9.5" wide) Front and 285/35/20 +28 (10.5" wide) Rear Michelin Pilot Sport 4s all around.

The tires are too large... Front rubbing the upper suspension arm under load (just sitting on the ground). Also with the Msport brake package, blue calipers, the inside of the wheel is right on the edge of rubbing ,2mm. Binding under load.

We looked at going to the OE m550i tire specs, got the tires in to tuck these beasts without rubbing...and this am we find the issue with the brake caliper clearance. hmmmm.. thinking 3mm spacers all around?

Or sell it off and just get some HRE's lol

Were you able to figure out the fitment? I have 636 on mine right now and would like to swap to the 706.

[Seanjr525]

Originally Posted by I3LaZeN

Heres a shot.

Would you say the best setup to do would be 12mm spacers and 255’s up front while on the H&R springs?

[MikeDeres]

Originally Posted by Cincy330i

Bought a brand new set of gloss black 706M wheels/tires from a friend. My m550i is at the shop now trying to make these fit. Here are the issues we found. m5 tire package 275/35/20 +28 (9.5" wide) Front and 285/35/20 +28 (10.5" wide) Rear Michelin Pilot Sport 4s all around.

The tires are too large... Front rubbing the upper suspension arm under load (just sitting on the ground). Also with the Msport brake package, blue calipers, the inside of the wheel is right on the edge of rubbing ,2mm. Binding under load.

We looked at going to the OE m550i tire specs, got the tires in to tuck these beasts without rubbing...and this am we find the issue with the brake caliper clearance. hmmmm.. thinking 3mm spacers all around?

Or sell it off and just get some HRE's lol

Cincy - what's the status of your wheel upgrade? I have a 2021 M550 and an opportunity to buy gloss black 706M from a 2023 M5. Love those wheels. But sounds like it's not a great fit?

[Kid Red]

Originally Posted by buddyboy

they both have 5 x 112 PCD, they look genuine to me based of the concave look ion the fronts vs the replica ones


Reps on my 540i for reference:

Looks great. What reps are those and are they holding up on rough roads and pot holes, etc?