[AP]

A thought , something I noticed on my 3017 model

Lane change assistant doesn't seem to work if I reduce the lane departure vibration/ warning

Haven't done a lot of testing but that seems to be the case . Might be worth considering ie ensure all of the safety aids are on before troubleshooting again

[ejlover06]

Originally Posted by AP

A thought , something I noticed on my 3017 model

Lane change assistant doesn't seem to work if I reduce the lane departure vibration/ warning

Haven't done a lot of testing but that seems to be the case . Might be worth considering ie ensure all of the safety aids are on before troubleshooting again

It's probably because of the latest technology in 3017 rendered this warning useless Just kidding

Do you mean the vibration/warning is not working? Or the active steering wheel interruption is not working?

Vibration is nearly turned of at lowest setting and it is very hard to feel at that case, so it's normal.

Interruption also reduces at lower settings. Car let's you cross lanes if you are doing it with the steering wheel. It will only be active if car drifts out of lanes by itself (without steering wheel input by the driver)

[AP]

I I mean if you configure the safety settings from being all on (green colour around the button on the dashboard) to individual where you reduce the intervention of lane departure warning (now yellow cooour around button on dashboard), lane change assist seems to now not work. Whether that's by design or a bug I don't know.

[Almaretto]

Originally Posted by chris_sd

Got it. I just used the getting started and coding guide and that recommended those old versions. Google doesn't provide any good links for esys plus guides. Anyone have some link to instructions for esys plus? Is it still to be used with launcher pro?

Chris

I have never used EsysPlus because too much work to disable constant Antivirus triggers as well as much slower than launcher pro.

[iliannavy]

Originally Posted by ADS-UK

Works fine for me. It seems like Lane Change Assist is disabled in some countries. Yours might be one of them.

Is it possible to send me NCD files for HU_MGU,DKombi,SAS, EPS,BDC_BODY.Because I try many options to add 5AR and set as per discussions here but nothing change.
Thanks

[The Zimmer]

I have full option wheel for sale

[iliannavy]

Originally Posted by roxxor

After a year of trying to figure it out, it finally works!! A big thank you to ifr for finally providing the final piece of coding that was causing the holdup!

It seems that in addition to the codes originally found by simpaty, BMW is using additional codes to block certain features from working in certain countries, based on where you are located. By changing this coding, you can enable the Lane Change Assistant to work regardless of your location.

The 3 codes to be changed are:
HU_NBT or HU_MGU:
Spurwechselassistent - Change this to Aktiv

SAS Module:
C_SWA_Vorhanden - Change this to True
C_SWA_Land_Aktiv - You will have to edit the Werte values to "FF, FF, FF, FF" This is the item that blocks it from working in certain regions.

And, the proof!

Hello.What option do you have 5AT or 5AU.Mine is 5AT and in the HU_MGU I have "gen_1".
Any suggestion for activate LCA.If you want can you send me your cafd file or I can send you to compare what I have to change int HU_MGU and SAS2

Thanks

[danielyup]

No, work lane change assist.
my car 530e(2022.02)

[Gautam]

Did anyone get this to work with a car that does not have it listed in the manual?

[The Zimmer]

Originally Posted by Gautam

Did anyone get this to work with a car that does not have it listed in the manual?

Yes I did

[r1cero]

How though? Did you do anything besides this:

The 3 codes to be changed are:
HU_NBT or HU_MGU:
Spurwechselassistent - Change this to Aktiv

SAS Module:
C_SWA_Vorhanden - Change this to True
C_SWA_Land_Aktiv - You will have to edit the Werte values to "FF, FF, FF, FF"

[WretchedRefuse]

r1cero Those are the codes I changed and it worked for me. Also check that you have option 5AT.

[r1cero]

Yeah, I have S5AT - Driving Assistant Plus.

After changing those codes, did you do something in idrive menu? Do you see the option in driving assistance menu?

[Almaretto]

Originally Posted by r1cero

Yeah, I have S5AT - Driving Assistant Plus.

After changing those codes, did you do something in idrive menu? Do you see the option in driving assistance menu?

[r1cero]

Thanks.

Anyone with the idrive6? Does this option appear in id6 once these codes are applied?

[AP]

I have id6 and whilst I can't comment on the coding, lane change assistant just displays a flashing lane marking for the side you are moving across to in the instrument binnacle and HUD if you have one.

At least on my car there is no option to enable or disable in the idrive menu. You just use it.
Which is to ensure that lane assist is on and active and simply indicating left or right
Assuming the lane is clear, the car moves across to that lane

[r1cero]

Lane markings turn white(become disabled) once I flick the indicator. I've also tried turning 'ALL ON' on the driving assistance menu, and also driving within speed limit.

[The Zimmer]

You should not click the indicator on but instead hold it in the position with the system activated if if you flick it then the system deactivates

[ezaircon4jc]

Originally Posted by AP

I have id6 and whilst I can't comment on the coding, lane change assistant just displays a flashing lane marking for the side you are moving across to in the instrument binnacle and HUD if you have one...

Is there a setting or coding for this? It doesn't show up in my HUD.

[AP]

As I say can't comment on coding bu in idrive re the hud , only thing I can think is to make sure that you have everything ticked to display in the hud, there is nothing specific to change lane assist though

[ezaircon4jc]

Originally Posted by AP

As I say can't comment on coding bu in idrive re the hud , only thing I can think is to make sure that you have everything ticked to display in the hud, there is nothing specific to change lane assist though

Are you talking about when the system is turned on? That does show up in the HUD. I thought you were talking about showing up when the system activates at ~40mph. There is a difference between the passive (steering wheel vibration) and active lane keeping.

[r1cero]

Originally Posted by The Zimmer

You should not click the indicator on but instead hold it in the position with the system activated if if you flick it then the system deactivates

Nope, whatever I do it automatically disables. Maybe the coding wasn't done properly.