Trouble installing M Perf. carbon mirror covers

[robbieMWM3]

It sure is tough getting the stock painted mirror covers off. Anyone have a tricks for removing them? Not as easy as it says it should be from IND. Thanks!

[Wah]

I used the back end of a pry tool to get it off, but I broke a few tabs on the stock cap. It was really cold in my garage though, so I don't know if that was part of the reason. I couldn't get the caps off with my fingers.



Whatever you do, don't use the thin end of the pry tool and get it under the cap. The stock cap has a little lip that gets damaged if you push a pry tool in there.

[robbieMWM3]

Originally Posted by Wah

I used the back end of a pry tool to get it off, but I broke a few tabs on the stock cap. It was really cold in my garage though, so I don't know if that was part of the reason. I couldn't get the caps off with my fingers.



Whatever you do, don't use the thin end of the pry tool and get it under the cap. The stock cap has a little lip that gets damaged if you push a pry tool in there.

Thank you. I will give that a try