| 08-29-2020, 04:06 AM | #1 |
|
Registered
0
Rep 3
Posts |
Hello guys!
First I want to thank shawnsheridan and Almaretto, that in addition to helping with "links" and very good tutorials, are they who always have help with answers here on the forum and in all the research I do they are always there... THANKS I have a BMW G31 from 07.2017 with I_Level S15A-17-07-505. I want fix the problem from using LED in reverse lights... After finding all the information I needed, I got to work... Because as I only have Apple computers I started by instal Windows 10 (64 bit) with official key through the bootcamp. Then I installed the necessary programs (  Shawnsheridan).
After all set I started by trying coding this: Reverse lights: On STV: BDC_BODY2 CAFD_000017BC_103_041_031 3061 RFS_L_KALTUEBERWACHUNG /nicht_aktiv 3061 RFS_L_WARMUEBERWACHUNG /nicht_aktiv 3061 RFS_L_IS_LED /aktiv 3061 RFS_R_KALTUEBERWACHUNG /nicht_aktiv 3061 RFS_R_WARMUEBERWACHUNG /nicht_aktiv 3061 RFS_R_IS_LED /aktiv and when i try to save i got the error No more memory available (C150)... I do some research and try to fix by follow instructions to create a system variable _JAVA_OPTIONS with a value of -Xmx512M. I changed that to -Xmx1024M and it almost worked... I was able to save the changes i have done in CAFD. But the same error came up again when I tried to inject the code... Because I got only 4GB Ram on my Macbook Air I thought the problem was in the amount of RAM available... I have a iMac with 16GB Ram then i do exactly the same configuration on it bring it down stairs and try to code with it and again by inject the code same (C150) error... Can some one tell me if the problem is use the E-Sys 3.27.1 or the E-Sys Launcher PRO 2.8.2_Build_162b BFU Edition to code a G31??? |
