03-15-2024, 03:21 PM | #1 |
Enlisted Member
5
Rep 35
Posts |
Front lip install help
Hi folks. Trying to understand how to install the front lip. From the instructions, it looks like the front plastic piece on the bottom (front engine shield/air guide) that the bumper cover bolts onto needs to be removed (so that the front lip can be bolted onto the bottom of the front bumper cover). Am I reading this correctly? Let me know, thanks.
|
03-15-2024, 03:46 PM | #2 |
Enlisted Member
5
Rep 35
Posts |
What I don't get is how am I suppose to fasten the bolts? From the diagram it looks like the left and right splash guard is still in place, or am I reading it wrong and the left and right splash guards comes out too?
|
Appreciate
0
|
03-15-2024, 03:57 PM | #3 |
Lieutenant
183
Rep 416
Posts |
I found it helpful to remove the center front underbody skid.
However, I only needed to detach the front hardware for the Front Corner Underbody Aero Covers. You might also find this review I did helpful if you run into issues with the hardware not being long enough. Keep in mind, I ended up only installing the lip, not the side splitters. So, if you wind up needing longer hardware, you might need even longer screws than what I bought. |
Appreciate
1
JSKS764.50 |
Post Reply |
Bookmarks |
|
|