[Herki]

Read my posts

[Biliardiere]

Originally Posted by Herki

Read my posts

to stop the warning from coming out of the dashboard, just make a diagnosis with ISTA, delete errors and then it no longer appears

[cedchung]

Originally Posted by iwantotlearn

Hello,

Using bimmercode do the following:
1. Go to instrument cluster (DKOMBI2)
2. Switch on expert mode
3. Go to 300A - CC_Konfiguration
4. Change the byte no.5(6th byte) value to F7
Done

Th error message will dissapear, idk if emergency call is still available after that tho

What is byte no.5 (6th byte)?
I have a ton of cc_meldung under 300A CC_Konfiguration.

[MikeGroth]

Originally Posted by cedchung

What is byte no.5 (6th byte)?
I have a ton of cc_meldung under 300A CC_Konfiguration.

Old thread I know, but for those who are still trying to figure this out. Set CC_MELDUNG_0299 to nicht_aktiv.

[greid]

I got his message today after disconnecting the battery, but it disappeared after a few restarts.

[maximking]

Originally Posted by iwantotlearn

Hello,

Using bimmercode do the following:
1. Go to instrument cluster (DKOMBI2)
2. Switch on expert mode
3. Go to 300A - CC_Konfiguration
4. Change the byte no.5(6th byte) value to F7
Done

Th error message will dissapear, idk if emergency call is still available after that tho

On G30 there are no CC configurations is diferent sistem.

[NesoX]

i can code it out from ur car or u change the battery

[bmwG0dMSport]

Originally Posted by MikeGroth

Old thread I know, but for those who are still trying to figure this out. Set CC_MELDUNG_0299 to nicht_aktiv.

Thanks Mike worked like a charm. Solved my issue without having to goto dealer. I will never use that feature so coding it off is worth saving $1900

[desonator]

Originally Posted by bmwG0dMSport

Thanks Mike worked like a charm. Solved my issue without having to goto dealer. I will never use that feature so coding it off is worth saving $1900

I can’t find where is CC_MELDUNG_0299…

Can you help me.

[kubax86]

Originally Posted by desonator

I can’t find where is CC_MELDUNG_0299…

Can you help me.

sure, PM Sent

[desonator]

I'm sorry, but I'm new and I haven't coded much and it's very possible to confuse.
In caf KOMBI, 📂 “ 300 A CC_konfiguration, 80” > 📂 “Funktionen”> there are many more folders all of which are named “CC_konfiguration_(digits_digits_digits). There are no 📁 CC_MELDUNG_0299

[kubax86]

Originally Posted by desonator

I'm sorry, but I'm new and I haven't coded much and it's very possible to confuse.
In caf KOMBI, 📂 “ 300 A CC_konfiguration, 80” > 📂 “Funktionen”> there are many more folders all of which are named “CC_konfiguration_(digits_digits_digits). There are no 📁 CC_MELDUNG_0299

Different scheme.
Can be done remotely if needed.

[desonator]

Originally Posted by kubax86

Different scheme.
Can be done remotely if needed.

Yes, I understand that you want to find clients, but I thought that people here help each other.