[davegill]

Hey guys,

I'm looking at sizing down to 19" from my current 20's. I found these wheels but the supplier says they wont fit my car. I don't have m brakes.

Front
https://pmctire.com/en/wheels/art/replica-228/roue-art-replica-228-noir-lustre-rebord-machine-19x8-5-5x112-66-6-deport-25.tire

Rear
https://pmctire.com/en/wheels/art/re...deport-35.tire

I'll be pairing these with 245/40/19 in the front and 275/35/19 in the rear. I know the offsets on the rims will cause them to stick out about 10mm in the front and 15mm in the rear from oem, but I'm ok with that as I believe that is the spacer configuration most people run anyways. Any other reason these might not fit? I'm a little confused as to why the supplier is so adamant they wont work.

[Knifeedge2k1]

https://www.wheel-size.com/calc/

Seems like it should be fine

[davegill]

Originally Posted by Knifeedge2k1

https://www.wheel-size.com/calc/

Seems like it should be fine

Ya thats what I thought. They mentioned something about not being able to guarantee that the spokes/barrel wont hit the brakes? I'm fairly certain the barrel wouldn't hit non-m brakes. How does one determine if the spokes would clear without actually test fitting them on the car?

[Knifeedge2k1]

Originally Posted by davegill

Ya thats what I thought. They mentioned something about not being able to guarantee that the spokes/barrel wont hit the brakes? I'm fairly certain the barrel wouldn't hit non-m brakes. How does one determine if the spokes would clear without actually test fitting them on the car?

Well given your offset change I highly doubt it would interfere but I'm not aware any method other than just trying

[Norris83]

Originally Posted by davegill

Hey guys,

I'm looking at sizing down to 19" from my current 20's. I found these wheels but the supplier says they wont fit my car. I don't have m brakes.

Front
https://pmctire.com/en/wheels/art/replica-228/roue-art-replica-228-noir-lustre-rebord-machine-19x8-5-5x112-66-6-deport-25.tire

Rear
https://pmctire.com/en/wheels/art/replica-228/roue-art-replica-228-noir-lustre-rebord-machine-19x9-5-5x112-66-6-deport-35.tire

I'll be pairing these with 245/40/19 in the front and 275/35/19 in the rear. I know the offsets on the rims will cause them to stick out about 10mm in the front and 15mm in the rear from oem, but I'm ok with that as I believe that is the spacer configuration most people run anyways. Any other reason these might not fit? I'm a little confused as to why the supplier is so adamant they wont work.

These will fit no problem but make sure you get the same brand front and rears. You have Replika is one brand and Art replica is another. It looks like Art Replica has the staggered setup.

ART - Replica 228 - Gloss Black Diamond Cut