[asm19]

Hello,

My BMW G31 came equipped with: 2VB Tire Pressure Indicator

I coded the to have the temperature of each tire in iDrive but it still just shows the pressure, like this:

HU_NBT2 -> 3001 -> RDC_SAFETY -> activ -> Werte=01

Do you need to change any more parameters?


HUD:

Another question, is it possible to have the turn signal show up on the HUD?

On my F11 I just had to configure it like this:

HUD TURN SIGNALS
KOMBI -> 3008 -> HUD_PIA_BLINKER -> aktiv
KOMBI -> 3008 -> BLINKER_HUD_ENABLE -> aktiv
HU_NBT -> 3000 -> HUD_TURNSIGNAL -> aktiv

In G31 I don't find these parameters.


Thank you!

[CnSky]

I'm interested in turn signal in hud also as I never look at the dash, would be great to know a turn signal is still on if it doesn't switch off automatically.

[SteveinArizona]

At least on the pre-LCI...no on the turn signal in the HUD although I wish it was available.

[BeeMdblU]

I think turn signal indicator in HUD stopped being doable on digital instrument clusters

[Joe-BMW33]

Yeah, for those coming from F series, F10 in my case, there are a handful of things that can be coded on the F cars that can't on G cars. Blinkers in HUD and remember Auto High Beam settings to name a few.

[ejlover06]

Originally Posted by Joe-BMW33

Yeah, for those coming from F series, F10 in my case, there are a handful of things that can be coded on the F cars that can't on G cars. Blinkers in HUD and remember Auto High Beam settings to name a few.

Remember Auto High Beam is really necessary I hate to push its button manually every time I start the car..

[Joe-BMW33]

Originally Posted by ejlover06

Remember Auto High Beam is really necessary I hate to push its button everytime I sart the car manually..

Yep, same, if I could have one thing on my wish list this would be it. Especially with Anti Dazzle and VLD coded.