[Ionutz009]

Hello,

I've searched for my answer for almost one week now and i couldn't find a clear answer, only presumptions.
I would like to buy a new set of wheels and to fit the 10j in the front for the rear i found that they already did that with 10.5j ET 33.
https://blog.**********s.com/bmw-g30...forgestar-f14/
And for the front they put 9.5j ET 28 after my calculation to keep the same poke i have to have 10j ET35, Do you think it will touch the wishbone arm?
I couldn't find any thing about space between the arm and the wheel and i have no wheels on the car to test it and take the measurements (I already sold them :|)
Thank you very much for your help!

[bryansna]

I have a 9 inch with ET 33 and it is really close. No rubbing that I see but, it does keep me on alert

[tjbuggy2b]

9.5" front is the widest I've seen or heard of.

[Ionutz009]

Originally Posted by bryansna

I have a 9 inch with ET 33 and it is really close. No rubbing that I see but, it does keep me on alert

rubbing on the inside or the outside?

[Ionutz009]

and for the rear i can put 11j? thanks guys for your help

[bryansna]

It is close on the inside.