03-09-2020, 06:00 PM | #45 | ||
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
|
||
Appreciate
0
|
03-10-2020, 02:59 AM | #46 | ||
First Lieutenant
105
Rep 335
Posts |
Quote:
Quote:
DSC: C_VFA_Funktion SAS10: C_SWA_Vorhanden KAFAS: VFW_AVAILABLE KAFAS: WWA_ENABLE BDC_BODY2: VCM_COUNTRY (mine was ECE) KOMBI: LAENDERAUSFUEHRUNG (mine was Sonstige) RS: C_SWW_Enable_LaneWidthAdjustmentByKAFAS and 2 or 3 language changes in NBT and KOMBI. So basically there seem no country restriction codes on the car But I've updated all these codes just in case including: DSC: C_EDP_Land_aktiv Werte=FF, FF, FF, FF DSC: C_vSLI_Land_aktiv Werte=FF, FF, FF, FF DSC: C_SWA_Land_aktiv Werte=FF, FF, FF, FF SAS: C_vSLI_Land_aktiv Werte=FF, FF, FF, FF SAS: C_EDP_Land_aktiv Werte=FF, FF, FF, FF SAS: C_EDP_Vorausschau_aktiv Werte=FF, FF, FF, FF SAS: C_EDP_SLI_aktiv Werte=FF, FF, FF, FF And finally I've FDL coded all features of 5AT except iBrake and ACC functions and nothing I've tried worked Limit Assist activated but cruise control doesn't asks to set current speed limit (no assist text on the cruise control image)
__________________
2017 G30 520 (1.6lt)
2016 S1000RR 2014 W205 |
||
Appreciate
0
|
03-10-2020, 04:12 AM | #48 | |
First Lieutenant
105
Rep 335
Posts |
Quote:
Opened a new one about the EDP, ISA, VZA, SLA: https://g30.bimmerpost.com/forums/sh....php?t=1702052
__________________
2017 G30 520 (1.6lt)
2016 S1000RR 2014 W205 |
|
Appreciate
0
|
05-07-2020, 08:50 AM | #49 | |
Enlisted Member
9
Rep 41
Posts |
Quote:
Coded this today but no luck. I'm in Australia. Anyone got it working here? My car is 2019 G01 X3 with 5AT- Driver Assistance Plus. I-Step S15A-20-03-540. No reason this isn't working in Australia. Confused now...Any idea what might have gone wrong? or any additional changes required? |
|
Appreciate
0
|
05-07-2020, 10:25 AM | #50 | ||
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
|
||
Appreciate
0
|
05-07-2020, 07:21 PM | #51 |
Enlisted Member
9
Rep 41
Posts |
Not really.
See post below https://x3.xbimmers.com/forums/showt...1699204&page=2 roxxor coded X3 G01, followed by many others. But not anyone in Australia. I don't think BMW team in Australia expert enough to block it only here. I see people got it working in US, Canada, Europe, UK, etc. |
Appreciate
0
|
05-08-2020, 04:49 AM | #52 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
He never got it working on the X3. If I read it right, he got it working on the G30, and assumed it would work on the X3 too. Seems a few got it working, but others were unsuccessful. I produced the coding and I can tell you I never tested or looked at getting it working on an X3. Doesn't mean it's not possible. Do you even get the option to enable it in idrive? I'm not familiar with the X3 so unsure which menu, if any, it would be in. You have a very recent i-step. You would need to send me your FA and SVT to confirm if the coding has changed, or what coding might be needed. Last edited by ifr; 05-08-2020 at 04:58 AM.. |
|
Appreciate
0
|
05-08-2020, 11:30 AM | #53 |
Major
1151
Rep 1,148
Posts |
IFR is correct, I did the coding on my G30 as I had already traded in my G01 at the point that he figured out the rest of the coding. As for the i-step, I dont think that should matter, as my car was just updated last week to the 20-03 level, and after I recoded it, it still works just fine. With iDrive 7, I get the option in the settings, yet it won't let me actually select the checkbox (greyed out). However the feature still works just fine even though it isn't checked.
|
Appreciate
0
|
05-08-2020, 12:25 PM | #54 | |
Enlisted Member
9
Rep 41
Posts |
Quote:
Mine is I-drive 6,thus won't get a options anyways. In saying that when I first coded 3 changes you guys mentioned, engine was on and started driving straight away after verifying the code. After couple of mins it gave an error saying "all driver assistent systems disabled, contact support" restarted the car never saw it again. All worked fine since then. Not sure if this means something. Worth decode and coding again? : |
|
Appreciate
0
|
05-08-2020, 05:34 PM | #55 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
SPURWECHSEL_ASSISTENT If available make it aktiv. Usually when a menu option is not selectable after being set in the head unit, it's missing settings in another ECU, often BDC and/or SAS. That setting is needed on the G05 I drive 7 |
|
Appreciate
0
|
05-08-2020, 06:54 PM | #56 | |
Major
1151
Rep 1,148
Posts |
Quote:
|
|
Appreciate
1
ifr1201.50 |
05-09-2020, 02:17 AM | #57 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
So if you backout the Spurwechselassistent code, and just keep the 2 SAS codes, it should still work without the errant idrive menu option. |
|
Appreciate
0
|
05-09-2020, 07:38 AM | #58 |
Enlisted Member
9
Rep 41
Posts |
Unfortunately, for now I have to conclude, Lane change assist cannot be enabled by FDL coding in Australia under 5AT - Driver Assist Plus. It could be some lower-level block.
Similarly, ConnectedDrive apps in motion( including Spotify-Android) and Video in motion are blocked and cannot be enabled by FDL coding. It will be a different story in Driver Assist Professional. Please keep it posted here if anyone had any luck. Thanks roxxor and @ifr |
Appreciate
0
|
05-09-2020, 01:18 PM | #59 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
You have a lot of testing to do, but all your issues may be resolved |
|
Appreciate
1
uadissa9.00 |
05-19-2020, 12:43 AM | #60 |
Enlisted Member
9
Rep 41
Posts |
If anyone got SWA working on a G01 with I-step-15A-20-xx , please post here.
There could be multiple reasons why it's not working on my car like, a. Region - Car Hardware incompetent b. Region - Software level block ( coding ticked off already) c. I-Step version d. G01 build year. Highly unlikely the reason to be [a] or [d] . BMW doesn't make ANZ region-specific cars, I presume. I saw someone got it working on a G01 2019, thus [d] is out too. Also, I can rule out [c], if someone can confirm if they got it working on my I-step level above. |
Appreciate
0
|
05-31-2020, 10:53 AM | #61 |
Private
99
Rep 80
Posts |
Can confirm it works on my G08 2020 X3(CN version of G01). It comes with iD7 system, 5AT option.
And it's also possible to change the default above 70km/h triggering speed. It's also in the SAS module. What I've changed to get Lane Change Assistant: HU_MGU: Spurwechselassistent - Aktiv SAS Module: C_SWA_Vorhanden - True C_SWA_Land_Aktiv - Value set to "FF, FF, FF, FF" |
Appreciate
0
|
06-03-2020, 02:10 PM | #62 | |
Enlisted Member
14
Rep 49
Posts |
Quote:
Are you able able to tick the LCA checkbox in iDrive? |
|
Appreciate
0
|
06-06-2020, 02:26 AM | #63 |
Private
99
Rep 80
Posts |
Not able to select, just leave it there, the LCA works when you activate ACC and Lane Keeping assit at then same time, also you need to reach 70km/h without speeding(it means you need a express way with speed limit like 80km/h or higher). When everything is enabled and showing green, make sure your side lane is clear,no cars near you, and gently holdyour turn signal without triggering constant signal(I don't know better description, it's what you do when you trigger 3x turn signal), and hold until the green lane on display start to blink, and you'll find your car is changing lane automatically.
|
Appreciate
0
|
06-06-2020, 06:56 AM | #64 | ||
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
The underlying Boolean in the cafd has it set to false for other models. Personally I wouldn't set it, though it doesn't appear to cause any issues other than an inactive menu item appearing in idrive. |
||
Appreciate
0
|
06-07-2020, 01:16 AM | #66 | |
Enlisted Member
9
Rep 41
Posts |
Quote:
What istep your car is running ? Also do you have 8TR on your FA? |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|