Question on V2 green loom

Hokie 335i · 12-23-2007, 01:33 PM

First off, what is the difference in the two green looms? It seems strange that we replace one green loom with another when we're intercepting the same wire in the ECU connector? The looms exactly the same, it's just that the newer one is longer and has the red part on it? I'm just curious.

Second, I see that some of you are using the old green loom to do the speed limiter defeat. I was gonna do this as well but I was worried since we don't have the little patch cables for the bypass plugs. Would we throw a code if we did the speed limiter defeat and then also used the bypass plugs? Seems like we'd have an open connection. Just looking for some clarification.

I'll definitely put in the speed sensor wire once we need it for V2.03 but for now I can wait. Don't need to go over 155 again now that I'm back in the US

Sniz · 12-23-2007, 01:40 PM

+1....what do we do about the bypass plugs?? I'm sure this answered in the past 30 days, I just couldn't find it.

O-cha · 12-23-2007, 01:42 PM

Yes you will throw a code if you do the speed wires without extra wires in the bypass plugs. I think the newer V2s were sent out with wires for that though :/.

The new green loom has some sort of resistor in it.

Hokie 335i · 12-23-2007, 01:44 PM

Quote:

Originally Posted by O-cha

Yes you will throw a code if you do the speed wires without extra wires in the bypass plugs. I think the newer V2s were sent out with wires for that though :/.

The new green loom has some sort of resistor in it.

Well at least now we know why they are different, that makes sense. I don't think any V2s were sent out with extra wires for bypass plugs because I got mine last week and I only had the 2 that were needed for the standard V2.

Sniz · 12-23-2007, 01:46 PM

Quote:

Originally Posted by Hokie 335i

Well at least now we know why they are different, that makes sense. I don't think any V2s were sent out with extra wires for bypass plugs because I got mine last week and I only had the 2 that were needed for the standard V2.

ditto, no extra wire for the bypass plugs.

Anyone have an internet source for these wires, i dont care the manufacturer as long as they have the same fittings.

Hokie 335i · 12-23-2007, 01:52 PM

Quote:

Originally Posted by Sniz

ditto, no extra wire for the bypass plugs.

Anyone have an internet source for these wires, i dont care the manufacturer as long as they have the same fittings.

I wish we could just make them easily but I'm guessing they have to be crimped by somebody that knows what they are doing. Just don't want to have to pay $8 shipping and wait 3 months to get 1 stupid wire from Vishnu. Just kidding Shiv

O-cha · 12-23-2007, 01:53 PM

Quote:

Originally Posted by Sniz

ditto, no extra wire for the bypass plugs.

Anyone have an internet source for these wires, i dont care the manufacturer as long as they have the same fittings.

Haltech sells them for sure, as for the crimping your talking about striping a wire putting it in a hole and squeezing some pliers. Not rocket science.

Hokie 335i · 12-23-2007, 01:57 PM

Quote:

Originally Posted by O-cha

Haltech sells them for sure, as for the crimping your talking about striping a wire putting it in a hole and squeezing some pliers. Not rocket science.

Well I am an Aerospace Engineer so I guess I should be able to figure it out

Where could we find that type of connector for the ends?

Sniz · 12-23-2007, 02:00 PM

Quote:

Originally Posted by O-cha

Haltech sells them for sure, as for the crimping your talking about striping a wire putting it in a hole and squeezing some pliers. Not rocket science.

Tuned335i · 12-23-2007, 02:22 PM

Quote:

Originally Posted by O-cha

Yes you will throw a code if you do the speed wires without extra wires in the bypass plugs. I think the newer V2s were sent out with wires for that though :/.

The new green loom has some sort of resistor in it.

The new green loom has a lower gauge (thicker) wire. At least mine did. Side by side they were obviously different (other than the red sleeve...)

munters · 12-23-2007, 04:54 PM

The Procede Side Female is from the "Deutsch" Sortiment DTMBKS 46020120141
Procede Side Male Side is as well "Deutsch" Sortiment but DTMSKS 46020220414
You can find them on
http://www.deutschconnector.com/prod...d_sockets.html
You need a special Crimp Tool...

Sniz · 12-23-2007, 04:56 PM

Good info!! Never seen that before.

Serjames · 12-24-2007, 04:19 AM

Is anyone prepared to knock some of these up ?

I'd pay.... 50P obviously plus shipping

No seriously anyone want to work out what it would cost ?

I'd be interested in two wires

SJ

Tuned335i · 12-24-2007, 10:38 PM

Quote:

Originally Posted by Serjames

Is anyone prepared to knock some of these up ?

Probably not publically, duh!!! You probably wouldn't get much support from Vishnu if you were using a bootleg harness! I sure wouldn't help you out if I was Vishnu and you bought a bootleg harness. You'd be on your own my Brother!!! I would save yourself the trouble and just get your harness the legitimate way!

Seriously, the support is getting better and you want to be in the club the legit way!

O-cha · 12-24-2007, 10:48 PM

Quote:

Originally Posted by Tuned335i

Probably not publically, duh!!! You probably wouldn't get much support from Vishnu if you were using a bootleg harness! I sure wouldn't help you out if I was Vishnu and you bought a bootleg harness. You'd be on your own my Brother!!! I would save yourself the trouble and just get your harness the legitimate way!

Seriously, the support is getting better and you want to be in the club the legit way!

(get to use it)

He's talking about the bypass wires that were not included with the v2 kits for whatever reason.

Tuned335i · 12-24-2007, 10:57 PM

Quote:

Originally Posted by O-cha

(get to use it)

He's talking about the bypass wires that were not included with the v2 kits for whatever reason.

Thanks WTF are you talking about? I got my V2 kit ages ago and my bypass plugs are fine. I know I'm an idiot so please explain.

O-cha · 12-24-2007, 11:01 PM

Quote:

Originally Posted by Tuned335i

Thanks WTF are you talking about? I got my V2 kit ages ago and my bypass plugs are fine. Please explain.

? Not much else I or anyone else can say besides what already has been.

Tuned335i · 12-24-2007, 11:08 PM

Ok I don't read every speed delimited thread because I think it's retarded to worrry about going over 155 in the USA, but I don't recall anyone else having an issue with this. Is this a problem in search of a solution or do you guys actually have an issue with a code being thrown or something?

O-cha · 12-24-2007, 11:11 PM

Quote:

Originally Posted by Tuned335i

Ok I don't read every speed delimited thread because I think it's retarded to worrry about going over 155 in the USA, but I don't recall anyone else having an issue with this. Is this a problem in search of a solution or do you guys actually have an issue with a code being thrown or something?

Wow, just READ THIS THREAD.

Tuned335i · 12-25-2007, 12:25 AM

Quote:

Originally Posted by O-cha

Wow, just READ THIS THREAD.

Ok, stop being a self-righteous prick and why don't you display your genius and explain it to everyone? Otherwise STFU!! I'm really tired of your self-righteous BS!!!

O-cha · 12-25-2007, 12:36 AM

Quote:

Originally Posted by Hokie 335i

Second, I see that some of you are using the old green loom to do the speed limiter defeat. I was gonna do this as well but I was worried since we don't have the little patch cables for the bypass plugs. Would we throw a code if we did the speed limiter defeat and then also used the bypass plugs?

Quote:

Originally Posted by O-cha

Yes you will throw a code if you do the speed wires without extra wires in the bypass plugs. I think the newer V2s were sent out with wires for that though :/.

Quote:

Originally Posted by Hokie 335i

I don't think any V2s were sent out with extra wires for bypass plugs because I got mine last week and I only had the 2 that were needed for the standard V2.

Quote:

Originally Posted by Sniz

ditto, no extra wire for the bypass plugs.

Anyone have an internet source for these wires, i dont care the manufacturer as long as they have the same fittings.

Not righteous, it's just the ENTIRE THREAD was about it.

Serjames · 12-25-2007, 04:35 AM

yeah you're right I certainly wouldn't want to step on Shiv's toes.

I would only ask for a third party to help manufacture these bypass plug wires, because I would imagine that Shiv just wouldn't want to start making these.

EVERYONE would insist on a back dated set and it would be another manufacturing nightmare for Vishnu !

SJ

12-23-2007, 01:33 PM	#1
Hokie 335i Private First Class 17 Rep 194 Posts Drives: F15 X5 50i M-Sport Join Date: Feb 2007 Location: DC Area iTrader: (1)	Question on V2 green loom First off, what is the difference in the two green looms? It seems strange that we replace one green loom with another when we're intercepting the same wire in the ECU connector? The looms exactly the same, it's just that the newer one is longer and has the red part on it? I'm just curious. Second, I see that some of you are using the old green loom to do the speed limiter defeat. I was gonna do this as well but I was worried since we don't have the little patch cables for the bypass plugs. Would we throw a code if we did the speed limiter defeat and then also used the bypass plugs? Seems like we'd have an open connection. Just looking for some clarification. I'll definitely put in the speed sensor wire once we need it for V2.03 but for now I can wait. Don't need to go over 155 again now that I'm back in the US
	Appreciate 0 Tweet Quote

12-23-2007, 01:40 PM	#2
Sniz Lieutenant General 658 Rep 10,587 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	+1....what do we do about the bypass plugs?? I'm sure this answered in the past 30 days, I just couldn't find it. __________________
	Appreciate 0 Quote

12-23-2007, 01:42 PM	#3
O-cha Brigadier General 218 Rep 4,726 Posts Drives: Mcoupe Join Date: Oct 2007 Location: In front of you iTrader: (2)	Yes you will throw a code if you do the speed wires without extra wires in the bypass plugs. I think the newer V2s were sent out with wires for that though :/. The new green loom has some sort of resistor in it. __________________
	Appreciate 0 Quote

12-23-2007, 04:54 PM	#11
munters Captain 11 Rep 677 Posts Drives: E91 335XI AT Dakota Black M Join Date: Jun 2007 Location: Switzerland iTrader: (0)	The Procede Side Female is from the "Deutsch" Sortiment DTMBKS 46020120141 Procede Side Male Side is as well "Deutsch" Sortiment but DTMSKS 46020220414 You can find them on http://www.deutschconnector.com/prod...d_sockets.html You need a special Crimp Tool...
	Appreciate 0 Quote

12-23-2007, 04:56 PM	#12
Sniz Lieutenant General 658 Rep 10,587 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	Good info!! Never seen that before. __________________
	Appreciate 0 Quote

12-24-2007, 04:19 AM	#13
Serjames Colonel 128 Rep 2,426 Posts Drives: E93 335i M-sport Join Date: May 2007 Location: Surrey - UK iTrader: (0) Garage List 2007 E93 335i M Spo ... [0.00] 2003 Nissan Primera S [0.00]	Is anyone prepared to knock some of these up ? I'd pay.... 50P obviously plus shipping No seriously anyone want to work out what it would cost ? I'd be interested in two wires SJ __________________
	Appreciate 0 Quote

12-24-2007, 11:08 PM	#18
Tuned335i Major 24 Rep 1,310 Posts Drives: E92 335i Join Date: Jun 2007 Location: World of Torque iTrader: (0)	Ok I don't read every speed delimited thread because I think it's retarded to worrry about going over 155 in the USA, but I don't recall anyone else having an issue with this. Is this a problem in search of a solution or do you guys actually have an issue with a code being thrown or something?
	Appreciate 0 Quote

12-25-2007, 04:35 AM	#22
Serjames Colonel 128 Rep 2,426 Posts Drives: E93 335i M-sport Join Date: May 2007 Location: Surrey - UK iTrader: (0) Garage List 2007 E93 335i M Spo ... [0.00] 2003 Nissan Primera S [0.00]	yeah you're right I certainly wouldn't want to step on Shiv's toes. I would only ask for a third party to help manufacture these bypass plug wires, because I would imagine that Shiv just wouldn't want to start making these. EVERYONE would insist on a back dated set and it would be another manufacturing nightmare for Vishnu ! SJ __________________
	Appreciate 0 Quote