O ring replacement

djpro1 · 09-11-2014, 06:57 PM

Hi guys

Do you know where I can buy the o ring replacement part?

I have a small leak going on at the moment as you can see from the image.

I am hearing conflicting stories that it's just my O ring or it's my oil housing gasket.

Any tips would be appreciated

Stuart@BMRAutowerkes · 09-11-2014, 09:15 PM

O ring comes with the oil filter, as far as I know not available seperately

The oil housing gaskets are around $50-60 for both, I have them in stock if you need it.

djpro1 · 09-11-2014, 10:33 PM

Quote:

Originally Posted by Stuart@BMRAutowerkes

O ring comes with the oil filter, as far as I know not available seperately

The oil housing gaskets are around $50-60 for both, I have them in stock if you need it.

hey Stu, based on the picture, would you say I need to replace the oil housing gasket as well? I'll replace the O ring and see how it goes. I don't want to break my serpentine belt amongst all the other things that could go wrong.

I might need to make a booking to get a boost leak fixed too. (plus you guys have my drop in filter when I put a DCI on my car - not sure if you threw it out but I realised I didn't have it when I drove off)

Scotty89 · 09-12-2014, 01:53 AM

I'm waiting on the oil filter housing gaskets from the USA at the moment.

My car is sitting in the driveway in pieces - yet I haven't needed to do anything with the serpentine belt. You can disassemble and re-install new gaskets without needing to remove the serpentine belt.

Getting the radiator fan out is a bitch face though.

Edit: As Stuart also mentioned, the large O ring that fits over the filter housing cap only comes with an oil filter kit. The BMW filters I got were only $11 ea from FCP Euro. You might as well get a new filter and chuck it in with the new O-ring at the same time. for $11 you can't lose.

335i-boy · 09-12-2014, 04:44 AM

I have exactly the same problem with oil pooling in the hollow on the right as you are facing the oil filter housing.

I was going to get the dealer to look at it as I thought it was the dreaded oil filter housing gasket issue.

Does any one know by looking at the OP's pic if that is an O-ring issue or the OFHG needs replacing?

R3N · 09-12-2014, 06:11 AM

replace oil filter and monitor, if still leaking then its the OFHG

09-11-2014, 06:57 PM	#1
djpro1 Private First Class 13 Rep 161 Posts Drives: 08 E93 335i Join Date: Mar 2014 Location: Sydney, Pymble iTrader: (0)	O ring replacement Hi guys Do you know where I can buy the o ring replacement part? I have a small leak going on at the moment as you can see from the image. I am hearing conflicting stories that it's just my O ring or it's my oil housing gasket. Any tips would be appreciated
	Appreciate 0 Tweet Quote

09-11-2014, 09:15 PM	#2
Stuart@BMRAutowerkes Major General 808 Rep 5,530 Posts Drives: a black car Join Date: Sep 2010 Location: Sydney iTrader: (3)	O ring comes with the oil filter, as far as I know not available seperately The oil housing gaskets are around $50-60 for both, I have them in stock if you need it.
	Appreciate 0 Quote

09-12-2014, 01:53 AM	#4
Scotty89 Buy a 335 they said... It'll be fun they said... 117 Rep 995 Posts Drives: 2007 E92 335i Join Date: Jun 2014 Location: Melbourne, Australia iTrader: (0) Garage List 2007 BMW 335i [10.00]	I'm waiting on the oil filter housing gaskets from the USA at the moment. My car is sitting in the driveway in pieces - yet I haven't needed to do anything with the serpentine belt. You can disassemble and re-install new gaskets without needing to remove the serpentine belt. Getting the radiator fan out is a bitch face though. Edit: As Stuart also mentioned, the large O ring that fits over the filter housing cap only comes with an oil filter kit. The BMW filters I got were only $11 ea from FCP Euro. You might as well get a new filter and chuck it in with the new O-ring at the same time. for $11 you can't lose.
	Appreciate 0 Quote

09-12-2014, 04:44 AM	#5
335i-boy Lieutenant 15 Rep 457 Posts Drives: E92 335i M-Sport Join Date: Jun 2010 Location: Australia iTrader: (0)	I have exactly the same problem with oil pooling in the hollow on the right as you are facing the oil filter housing. I was going to get the dealer to look at it as I thought it was the dreaded oil filter housing gasket issue. Does any one know by looking at the OP's pic if that is an O-ring issue or the OFHG needs replacing? __________________ 2008 E92 335i M-Sport \| Sapphire Black \| Sunroof \| Creme Beige \| Poplar Grey \| Logic 7 \| 6AT \| 19" AG M359's \| Michelin PS4S \| LUX V3 \| MHD V5 E40 \| Steve AZ Walbro inline \| Vishnu DCI \| BMS CP \| AR Design Catless DP's \| Forge DV's \| Helix IC \| (Stock Cat. back) \|
	Appreciate 0 Quote

09-12-2014, 06:11 AM	#6
R3N Second Lieutenant 9 Rep 252 Posts Drives: None Join Date: Aug 2012 Location: Perth, Australia iTrader: (0)	replace oil filter and monitor, if still leaking then its the OFHG
	Appreciate 0 Quote