[Bavarian Tech]

Is it possible to do a factory reset on jb4 ? I bought one used from a member on here and he has all these unique things going on with the cluster that I'm not really interested in. Also does anyone know if Jb4 or any other product is able to send the proper signal for an M3 shift lights retrofit. I'd much rather use the stock shift lights than the turn signals

Boost gauge on oil temp
Cluster sweep
Shift lights on turn signals

[climax_e92]

You can reset it when you connect your laptop

[v1nc86]

Originally Posted by Bavarian Tech

Is it possible to do a factory reset on jb4 ? I bought one used from a member on here and he has all these unique things going on with the cluster that I'm not really interested in. Also does anyone know if Jb4 or any other product is able to send the proper signal for an M3 shift lights retrofit. I'd much rather use the stock shift lights than the turn signals

Boost gauge on oil temp
Cluster sweep
Shift lights on turn signals

Go to the JB4 command mode (press both the volume select and channel select down buttons).

- To reset Boost gauge on oil temp: go to menu 7, select option 0.
- To reset Cluster sweep: go to menu 5, select option 7.
- To reset Shift lights on turn signals: go to menu 3, select option 7.

However, you should connect your laptop and reset all settings...