FS/WTT: E9x 335 (N54/N55) Custom Cat-back Exhaust

pileofstack · 06-08-2015, 12:29 PM

BIMMERPOST / Classifieds

Asking Price:

USD 450.00

Location:

✓ Will Ship

Item Interest

For trade, I have a very exotic sounding exhaust. Formally referred to as "The Equal Opportunity Boom Tubes," this one-of-a-kind masterpiece was fabricated using only the best Vibrant stainless components (all plumbing, v-band flanges, clamps, and two 3-inch resonators) at a better build quality than most, if not all, $1k+ 335 exhausts. Not that it matters or increases the value, but did I mention it was on a Performance BMW cover car?

Before you read on:

***YOU WILL NEED A 328 REAR BUMPER [on a 335] TO RUN THIS EXHAUST***

Exhaust consists of a gutted stock mid-section, all the way to the rear axle (AKA: straight-piped). Just after the rear subframe, it's V-banded for easy removal and uses the stock, driver's side exhaust hanger. Aggressive 3-inch, "slash-cut" tips give this exhaust an aggressive look. If you've de-badged your 335, instant sleeper status will be achieved. If you're running kittycatless DP's, you WILL wake the dead and startle the old. If you're running stock DP's, it's still quite loud (my neighbors hate me and the jets that fly over every day).

Individuals with highly inflated BMW egos will gawk at you and question your sanity immediately upon running a 325/328/330 bumper with a 335i badge. They will be so confused, they'll probably miss a shift and you'll smoke their ass (as if you weren't already going to do that). They too will get to hear the sound of the boom tubes, as you unleash the raw power of your forced induction straight-six.

I want to trade this whole exhaust (cat-back) for your stock 335 exhaust, plus some cash on top (this part negotiable). I will personally remove your exhaust and install this one free of charge, if you come to me.

Soundclip

I'd be happy to elaborate on anything if there's serious interest.

Whathedunks · 06-08-2015, 05:01 PM

Wish I was closer! glws

pileofstack · 06-12-2015, 03:31 PM

Bump. This fits all 335's.

The v-band clamps from the axle back make it easy to modify it for a 335 rear bumper.

adidoman · 06-13-2015, 11:59 AM

Do you have a build of this anywhere?

snaimpally · 06-13-2015, 02:05 PM

Wow! That looks and sounds awesome. GLWS

pileofstack · 06-17-2015, 02:32 PM

Quote:

Originally Posted by snaimpally

Wow! That looks and sounds awesome. GLWS

Thanks!

Photo of removable axle-back section added.

jake_h · 06-17-2015, 10:05 PM

Where are you located?

pileofstack · 06-17-2015, 10:08 PM

Quote:

Originally Posted by jake_h

Where are you located?

Vermont.

jake_h · 06-17-2015, 10:25 PM

Was hoping you were local. GLWS man

CeeWhizzle · 09-30-2015, 04:41 PM

Still for sale?

meekz · 10-16-2015, 11:31 AM

I have a 335 stock exhaust for trade.

pileofstack · 10-19-2015, 07:21 AM

Quote:

Originally Posted by MaxMeeks

I have a 335 stock exhaust for trade.

PM'd

pileofstack · 11-30-2015, 03:35 PM

Still FS/FT bump.

whyzee125 · 12-03-2015, 08:30 PM

Dang I wish you were local. This is exactly what I want. Sounds incredible too!

idratherbesurfing · 12-03-2015, 09:20 PM

I have stock exhaust sitting around. If you sell your exhaust...mine is available. Im not interested in a trade though.

06-08-2015, 12:29 PM	#1
pileofstack Blast Master 14 Rep 111 Posts Drives: E90 335i Join Date: Feb 2014 Location: Uncle Rick's Stabbin' Cabin iTrader: (0)	FS/WTT: E9x 335 (N54/N55) Custom Cat-back Exhaust BIMMERPOST / Classifieds Asking Price: USD 450.00 Location: ✓ Will Ship Item Interest For trade, I have a very exotic sounding exhaust. Formally referred to as "The Equal Opportunity Boom Tubes," this one-of-a-kind masterpiece was fabricated using only the best Vibrant stainless components (all plumbing, v-band flanges, clamps, and two 3-inch resonators) at a better build quality than most, if not all, $1k+ 335 exhausts. Not that it matters or increases the value, but did I mention it was on a Performance BMW cover car? Before you read on: *YOU WILL NEED A 328 REAR BUMPER [on a 335] TO RUN THIS EXHAUST* Exhaust consists of a gutted stock mid-section, all the way to the rear axle (AKA: straight-piped). Just after the rear subframe, it's V-banded for easy removal and uses the stock, driver's side exhaust hanger. Aggressive 3-inch, "slash-cut" tips give this exhaust an aggressive look. If you've de-badged your 335, instant sleeper status will be achieved. If you're running kittycatless DP's, you WILL wake the dead and startle the old. If you're running stock DP's, it's still quite loud (my neighbors hate me and the jets that fly over every day). Individuals with highly inflated BMW egos will gawk at you and question your sanity immediately upon running a 325/328/330 bumper with a 335i badge. They will be so confused, they'll probably miss a shift and you'll smoke their ass (as if you weren't already going to do that). They too will get to hear the sound of the boom tubes, as you unleash the raw power of your forced induction straight-six. I want to trade this whole exhaust (cat-back) for your stock 335 exhaust, plus some cash on top (this part negotiable). I will personally remove your exhaust and install this one free of charge, if you come to me. Soundclip I'd be happy to elaborate on anything if there's serious interest. __________________ IG: @whenstacksattack Last edited by pileofstack; 06-17-2015 at 02:32 PM..
	Appreciate 0 Tweet Quote

06-08-2015, 05:01 PM	#2
Whathedunks Second Lieutenant 23 Rep 294 Posts Drives: 335i Join Date: Sep 2009 Location: South iTrader: (2)	Wish I was closer! glws
	Appreciate 0 Quote

06-12-2015, 03:31 PM	#3
pileofstack Blast Master 14 Rep 111 Posts Drives: E90 335i Join Date: Feb 2014 Location: Uncle Rick's Stabbin' Cabin iTrader: (0)	Bump. This fits all 335's. The v-band clamps from the axle back make it easy to modify it for a 335 rear bumper. __________________ IG: @whenstacksattack
	Appreciate 0 Quote

06-13-2015, 11:59 AM	#4
adidoman First Lieutenant 56 Rep 369 Posts Drives: '10 335i xDrive Join Date: May 2014 Location: Denver, CO iTrader: (1)	Do you have a build of this anywhere?
	Appreciate 0 Quote

06-13-2015, 02:05 PM	#5
snaimpally Major 136 Rep 1,192 Posts Drives: 2011 335i MT Join Date: Mar 2014 Location: Austin, TX iTrader: (9) Garage List 2011 BMW 335i [0.00]	Wow! That looks and sounds awesome. GLWS __________________ PTF Map, Pure Turbo Stage 1, GFB DV+, Mfactory LSD, AA FMIC, B12 Pro Kit, M3 FCA, AR DP and Dynavin N6, Mosconi AS100.4, AS100.4, AS200.2, Micro Precision tweeters & woofers, Esotar2 1200
	Appreciate 0 Quote

06-17-2015, 10:05 PM	#7
jake_h New Member 0 Rep 12 Posts Drives: e92 335i Join Date: Jun 2015 Location: Socal iTrader: (0)	Where are you located?
	Appreciate 0 Quote

06-17-2015, 10:25 PM	#9
jake_h New Member 0 Rep 12 Posts Drives: e92 335i Join Date: Jun 2015 Location: Socal iTrader: (0)	Was hoping you were local. GLWS man
	Appreciate 0 Quote

09-30-2015, 04:41 PM	#10
CeeWhizzle Lieutenant 77 Rep 538 Posts Drives: 2009 E92 335i Join Date: Feb 2014 Location: Regina, SK iTrader: (1)	Still for sale?
	Appreciate 0 Quote

10-16-2015, 11:31 AM	#11
meekz Private First Class 37 Rep 175 Posts Drives: 2008 335xi Join Date: Apr 2014 Location: Michigan iTrader: (1)	I have a 335 stock exhaust for trade.
	Appreciate 0 Quote

11-30-2015, 03:35 PM	#13
pileofstack Blast Master 14 Rep 111 Posts Drives: E90 335i Join Date: Feb 2014 Location: Uncle Rick's Stabbin' Cabin iTrader: (0)	Still FS/FT bump. __________________ IG: @whenstacksattack
	Appreciate 0 Quote

12-03-2015, 08:30 PM	#14
whyzee125 Brigadier General 1679 Rep 3,645 Posts Drives: Dinan stage 2 335i Join Date: Jul 2014 Location: Chattanooga Tn iTrader: (0)	Dang I wish you were local. This is exactly what I want. Sounds incredible too!
	Appreciate 0 Quote

12-03-2015, 09:20 PM	#15
idratherbesurfing Captain 145 Rep 841 Posts Drives: 2009 e90 335i Lci Join Date: Mar 2014 Location: NJ iTrader: (0)	I have stock exhaust sitting around. If you sell your exhaust...mine is available. Im not interested in a trade though.
	Appreciate 0 Quote