[N54Twin]

I try to update my GWS"shifter" using winkfp got and error at the end... I can move my car now please help shifter light is off.

Pleaseeeee anyone

Im here sitting down almost crying

[JDuke335i]

I got those errors when trying to flash something that was in the most ring . To flash something that's in the most ring you need Com A,B,C . I'm not sure if that's your problem , good luck

[Sensible_]

I can or can't move the car?

Was this a manual zusb number or did you update by comfort mode and 'update zusb'?

[N54Twin]

Originally Posted by Sensible_

I can or can't move the car?

Was this a manual zusb number or did you update by comfort mode and 'update zusb'?

Can't, I manual update

[Sensible_]

Just flash it with correct zusb.

[N54Twin]

Originally Posted by Sensible_

Just flash it with correct zusb.

Error keeps pupping up

[Sensible_]

I would suggest reinstalling latest daten files in that case. Use BMW Coding Tool to do the import and try to find a different daten set.

You can also play with Tool32 to run the security test again. I guess this will fail but worth a try.

[N54Twin]

Originally Posted by Sensible_

I would suggest reinstalling latest daten files in that case. Use BMW Coding Tool to do the import and try to find a different daten set.

You can also play with Tool32 to run the security test again. I guess this will fail but worth a try.

Ok i remove my sport shifter and put back the old one and is working.... I dont know wtf is wrong with sport the shifter

Paid $50 tow, I should have done what was in my mind since the problem started.... Change the fucking shifter....

[N54Twin]

Problem solved.....

[dannyjones]

Originally Posted by Kewill0360

Problem solved.....

Can you explain how it was solved for the benefit of others who may end up in the same situation? Was it simply going back to the previous shifter?