Alignment after removing rear knuckle?

thecadman99 · 10-10-2015, 05:31 PM

In the process of changer my rear driver wheel bearing- I've managed to strip the head on one of my axle mounting bolts (pics of these boogers here: http://www.pelicanparts.com/BMW/tech...mall/pic03.jpg )

I'm going to try to just reinstall the axle mount bolts and remove the knuckle to change the bearing.

Will it work? Will I need an alignment afterward?

feuer · 10-11-2015, 09:27 AM

If you are not removing or loosening up the eccentrical bolts for toe and camber alignment will not be required.

thecadman99 · 10-11-2015, 12:09 PM

Quote:

Originally Posted by feuer

If you are not removing or loosening up the eccentrical bolts for toe and camber alignment will not be required.

Thanks Feur, thats what I was hoping to hear-

10-10-2015, 05:31 PM	#1
thecadman99 Lieutenant 53 Rep 450 Posts Drives: e90 330i 6mt spt bk/bk Join Date: Jun 2012 Location: Virginia iTrader: (0)	Alignment after removing rear knuckle? In the process of changer my rear driver wheel bearing- I've managed to strip the head on one of my axle mounting bolts (pics of these boogers here: http://www.pelicanparts.com/BMW/tech...mall/pic03.jpg ) I'm going to try to just reinstall the axle mount bolts and remove the knuckle to change the bearing. Will it work? Will I need an alignment afterward? __________________ 06 330i 6mt Spt- Eibach Springs, BMW Perf Susp, Supersprint Exhaust, BSW Audio RIP-94 325i 5mt 4d- M3 springs/susp, Z3 wheels, Chipped, Intake, Exhaust= FUN!
	Appreciate 0 Tweet Quote

10-11-2015, 09:27 AM	#2
feuer Major General 4276 Rep 9,206 Posts Drives: wife crazy! Join Date: Apr 2015 Location: Chicago, IL iTrader: (5)	If you are not removing or loosening up the eccentrical bolts for toe and camber alignment will not be required.
	Appreciate 0 Quote