[terminator335i]

Ok people,

Details of the Meet are below:

Date: Sunday 15th November 9am
Address: 100 Liardet Street, Port Melbourne (infront of Edwards Park) and Dow Street. Plenty of parking there. Also next to Bay street are plenty of cafes, so great for all you coffee lovers who wanna grab one before the meet.

Please reply to this thread if you are attending so I know numbers (already have over 20 replies in my PM).

I'll try and provide morning tea for everyone but please confirm you are attending so I know how much to cater for.

Meet will be for all Bimmer owners, so don't be shy, come say hello to others on the forum and check out their build, chat and share.
There will be some experts attending who can do some car coding (vtl your the man) but anyone who knows how to do it, please come along and show others. Please bring a laptop and a notepad if you want to learn and take down notes.

Afterwards, a mini-cruise down by the bay along Beach Street through to Albert Park and the back end of Port Melbourne to finish off the morning...

I'll be bringing out my camera ready for a photoshoot....

See map below:

https://www.google.com.au/maps/place...3730c1bb2906bc

[iliketurtl3s]

vtl the savoir! u have been summoned.

[vtl]

Ha I was thinking of organizing a meet a while back for this but had totally forgot about it.

Would be happy to attend a meet and show people how to use the tools.

I have BMW standard tools:
INPA - Diagnostics
NCSExpert - Coding
WinKFP - Flashing firmware updates
Tool32 - low level commands

BMW TIS - Service manual software up to 2008
BMW WDS - Wiring diagram system

Also have ISTA which is the latest tools but have only got the service manual functionality working.

Everyone should bring laptops and hard drives, preferably USB3. Could also bring in a Gigabit ethernet switch to distribute the files.

[timot]

I'm down

[Boganian Rubes]

Vtl you should just setup an RTO and become a trainer haha
Can you code a dpf delete too?

[naynay]

vlt4przdent

[vtl]

Originally Posted by Rub3n

Vtl you should just setup an RTO and become a trainer haha
Can you code a dpf delete too?

Unsure as to what is involved in a dpf delete. As far as I know its an ecu reflash and not coding, NCS Expert does not code DME or DDE modules. In theory you might be able to modify the WinKFP data files to reflash your ecu for the dpf delte but I have not looked into it.

I think a lot of tuners will use a bdm programmer (an circuit motorola mcu programmer which requires ecu removal) to dump the ecu then modify and reupload. But no idea if the dpf delete is just setting/clearing a bit in a memory location. If you can find a forum post of someone doing it DIY I might be able to help.

[turtleman]

i'm in.

[7smurfs]

In!

[hyper.1]

Can a newbie come and learn?

[Boganian Rubes]

I think vtl is the only non noob here

[vtl]

I will probably only be able to go if its in mid November. I hit a small kangaroo (minor cosmetic damage) and will be holding off on repairs until after the Oct 25th Melbourne drive day. So won't have a car for a little while after that

[Armadyllo]

I'm Keen !! Although I'm pretty retarded with these things, I'm struggling to reset my brakes after a replacement, but I did manage to clear the service thing lol

[iliketurtl3s]

can confirm vtl knows his shit and his hair is amazing

[vtl]

Originally Posted by iliketurtl3s

can confirm vtl knows his shit and his hair is amazing

Haha thanks bro

[Socket]

sorry what's going on???

[terminator335i]

.

[vtl]

Originally Posted by terminator335i

ok guys lots of interest so meet up will be 9am sunday 25th october in port melbourne. Good place for a coffee, meet up, coding session and cruise along the bay. Pm me for more details if you are attending.

Pretty much none of us will make that date:

http://www.e90post.com/forums/showthread.php?t=1168640

[terminator335i]

Sorry guys, totally forgot about the cruise day. I've changed the meet and coding session to now Sunday 15 November at 9am in Port melbourne. City centre so everyone can attend (makes it easier so any east siders,west siders,northern peps can still come and catch up). Good morning coffee in the area, great atmosphere, nice cruise down the beach, meet other members and enthusiasts who share the same passion, share experiences and knowledge (especially if you know how to do coding to others that are interested) and show off your beauty to all!!!!. Doesn't matter what series, or model (E or F) you have, if it's a Beemer it deserves to be there! I'll have my digital camera ready for some photoshoot of the event. I myself am a newbie to the forum and would love to learn from others myself, so don't be shy. No haters or wankers please.

Come along for a good gathering people. I'll post the exact location when closer to the date. Please PM me if you would like to attend.

[terminator335i]

Due to the overwhelming interest on other local forum sites that I have posted this thread on, Melbourne meet will be coming!!!
Sorry guys, totally forgot about the cruise day. I've changed the meet and coding session to now Sunday 15 November at 9am in Port melbourne. City centre so everyone can attend (makes it easier so any east siders,west siders,northern peps can still come and catch up). Good morning coffee in the area, great atmosphere, nice cruise down the beach, meet other members and enthusiasts who share the same passion, share experiences and knowledge (especially if you know how to do coding to others that are interested) and show off your beauty to all!!!!. Doesn't matter what series, or model (E or F) you have, if it's a Beemer it deserves to be there! I'll have my digital camera ready for some photoshoot of the event. I myself am a newbie to the forum and would love to learn from others myself, so don't be shy. No haters or wankers please.

Come along for a good gathering people. I'll post the exact location when closer to the date. Please PM me if you would like to attend.

[Socket]

I'm down for 15 Nov

[MSportBMW]

The 8th November is better option for me Would you be able to organise it on the 8th instead of week later ?