[Hartge]

Hi guys,

I have bought M3 3 pin mirrors and need the wiring and coding doing for these as I have the 5 pin connectors.

And also, I have installed M3 heated, electric memory seats. I have wired these and they are working but not the heated part of them, so need this doing, I have the switch pack for the heated seats and this is installed. You might want to change my wiring that I have done, but its working.

I have friends with Autologic so if anyone has a step by step on the wiring and coding I could do this myself and get them to do the coding, they will need coding help though,

Thanks

[Shorty1608]

Your m3 seats you wired in.. Do the heated switch lights stay on when you turn it on or go off shortly after?

[Hartge]

Originally Posted by Shorty1608

Your m3 seats you wired in.. Do the heated switch lights stay on when you turn it on orgooffahoetly after?

Hi, the switches light up but don't know if they go off again I will have to check, but the heated pin on the seat is not connected to anything

Do I just need a power line to that pin and then recode them in ?

Thanks

[Shorty1608]

Originally Posted by Hartge

Hi, the switches light up but don't know if they go off again I will have to check, but the heated pin on the seat is not connected to anything

Do I just need a power line to that pin and then recode them in ?

Thanks

I fit some heated m5 seats into a friends e60 5 series, we had a problem with the ground. Which was turning the switch on then it went off after 5 seconds, I'm not sure if the m3 seats are the same but we got wiring diagrams from both and worked out what pins needed to be wired where etc, yes they did require adding to the VO to finally work too