[Blackarrow335i]

Hey guys I know there are many threads outside about it but it seems like as soon somebody figures it out never post there solutions!
We (me and my buddy) trying to code my alarm and sirus/ sataliete radio my car is a 2009 e92 pre wired for alarm and sirus! We started with the alarm got it so far that it beeps for locking and unlocking but NO panic or anything in iDrive! Neither for the alarm nor the sirus! Is there somebody who could walk us truh or remote code that! I'm willing to pay!

Thanks in advance!

[VTECaddict]

What exactly have you done so far coding wise?

[Blackarrow335i]

Originally Posted by VTECaddict

What exactly have you done so far coding wise?

for the alarm we added +K302 to the VO Parameter
Changed following values for the alarm
(DWAI)
Old Value New Value
LAUTSTAERKE nicht_aktiv aktiv
ALARM_OPT_FERNLICHT nicht_aktiv aktiv
QUIT_AKUST_SCHAERF_KLAPPE nicht_aktiv aktiv
PANIK_ALARM nicht_aktiv aktiv
QUIT_AKUST_ENTSCH nicht_aktiv aktiv
DEF_QUIT_AKUST_ENTSCH nicht_aktiv aktiv
DEF_QUIT_OPT_ENTSCH nicht_aktiv aktiv
DEF_QUIT_AKUST_SCHAERF_KL nicht_aktiv aktiv
ANFRAGE_FENSTERPOSITIONEN nicht_aktiv aktiv
PIAU_AKUST_ENTSCH nicht_aktiv aktiv
PIAU_AKUST_SCHAERF_KLAPPE nicht_aktiv aktiv
SIGNAL_HK nicht_aktiv aktiv

(CAS)
Parameter Old Value New Value
SONDERTASTE_PANIKALARM nicht_aktiv panikalarm
MOTORHAUBENKONTAKT nicht_aktiv aktiv

(CIC)
Parameter Old Value New Value
ACOUSTIC fkt_gesperrt fkt_frei
C941C_QUITT_AKUST_KLAPPE fkt_gesperrt fkt_frei
K9416_QUITT_AKUST_ENTSCH fkt_gesperrt fkt_frei
C9413_QUITT_AKUST_SCHAERF kt_gesperrt kt_frei

(CIC)
Parameter Old Value New Value
ACOUSTICAL_LOCK_CONFIRM nicht_aktiv aktiv

but still don't have anything showing up on iDrive also the panic button still does not work, but the beep for lock/unlocking which didn't before!

and if we try to code the whole car with default settings ( "Process Car" ) it works for the first modules and suddenly i get a error message! but i also realized that i didn't mess with the optical cable behind the left rear back seat! could that explain why i get a error message something like could not connect or talk to ...modul( i will ask my buddy whats exactly error message it is! but first i would like to know why the alarm isn't working correct!

Thanks in advance for any help!!!!

[VTECaddict]

Not sure about the alarm coding since I've never done it. Did you write the new VO to CAS, NFRM, and CIC and default code all of them?

For SDARS you definitely need to hook up the MOST cables to include the SDARS tuner in the MOST bus loop. There should be a Sirius retrofit instruction manual floating around the internet if you search for it.

[fmonteiro444]

For Sirius, the car is probably already coded for it(mine was). But you need to physically swap fiber optic cables in the MOST junction box. See attached file

[Blackarrow335i]

Thank you guys just got back to my buddy's house so we start with swapping the cables around now

[Blackarrow335i]

Ok error code:
Error in CABD! Look at CABI.ERR and ERROR.LOG!
COAPI -2020 ECU does not answer IFH-0009 no response from control unit ULF2-HI
COAPI 2020 ECU does not answer CODIERDATEN lesen

What to do?

[teklein]

I'm his buddy coding it. I can read every other module without issue except the 2MULF. I get the same error if I try to read it as well. We are using a One Stop cable, v56 Daten files. I believe that my setup is fine as I can code everything else without issue. Disabled AV, ran NCS as an admin, etc.

[fmonteiro444]

Originally Posted by teklein

I'm his buddy coding it. I can read every other module without issue except the 2MULF. I get the same error if I try to read it as well. We are using a One Stop cable, v56 Daten files. I believe that my setup is fine as I can code everything else without issue. Disabled AV, ran NCS as an admin, etc.

You can't read that module. I had the same issue. But once I swapped the optic cables it worked.

[teklein]

Originally Posted by fmonteiro444

You can't read that module. I had the same issue. But once I swapped the optic cables it worked.

Ok, so in stock form I need to swap as well? We just unhooked the satellite module to see if it would do it, same error.

[fmonteiro444]

Originally Posted by teklein

Ok, so in stock form I need to swap as well? We just unhooked the satellite module to see if it would do it, same error.

Yes. When I installed mine recently all I did was plug in the Sirius module and swap the fiber optic cables. Then I turned on the radio and I had Sirius.

[teklein]

Ok, so the 2MULF issue with processing the car after I added +K302 to CAS and NFRM has nothing to do with the Sirius box?

[fmonteiro444]

Originally Posted by teklein

Ok, so the 2MULF issue with processing the car after I added +K302 to CAS and NFRM has nothing to do with the Sirius box?

Correct